Meguiar's Mirror Glaze Ultra Cut Compound

Meguiar's Mirror Glaze Ultra Cut Compound

Meguiar's Mirror Glaze Ultra Cut Compound is a very coarse polish with an Extra Heavy Cut level of no less than 12/12! Rapid defect removal & minimal swirl thanks to exclusive super-micro abrasives technology. Ideal for removing scratches, swirls, paint defects, holograms and traces of acid rain from any type of car paint!

Polishing compound with a super fast cut!

Meguiar's Mirror Glaze Ultra Cut is known for its super fast cut. Thanks to the Super Micro Abrasive technology, this compound provides a high paint correction for damaged car paint! In addition to removing deep scratches, it can also be used for repairing weathered and dull car paint! Super-micro abrasives leave best in class finish.

Restore weathered paint and deep scratches!

Ultra-fast cutting removes 1200 grit or finer sanding marks. Great for removing scratches, defects, acid rain and severe swirls/holograms.

How do I use Meguiar's Mirror Glaze Ultra Cut polish?

1. Shake well before use
2. Apply to clean, properly cured paint surface
3. Work one section at a time
4. Hand application: excellent for rubbing out door jambs and spot hand compounding. Simply apply to a soft cloth and rub desired area. Wipe residue with clean side of towel
5. Dual Action polisher: Apply directly to foam cutting pad. Set polisher to 4-5 (for MT310 set 4.800-5.800 opm’s).Apply moderate pressure on initial 2-3 passes followed with light pressure for next 2 passes. Wipe off residue immediately after each panel
6. Rotary buffer: Set buffer to approximately 1500-2000 RPM’s and use wool pad. To prime new or dry pads mist on with M34 Final Inspection. Apply the compound directly to the paint surface and work in an area 5x5cm with overlapping passes. Continue until defects or sanding marks are removed. Wipe off residues with a microfiber towel, prior to polishing
7. For optimal results on OEM paints use a lower speed 1200-1500 and less pressure
8. For final polishing use the M20532 Ultra Finishing Polish with appropriate foam pad
9. For optimal results clean your pads frequently

Features Meguiar's Mirror Glaze Ultra Cut Compound

• Excellent for rubbing door jambs
• Ultra fast cutting
• Ultra fast cutting removes 1200 grit and finer sanding marks
• Especially for removing:
  • Swirls
  • Holograms
  • Defects
  • Deep scratches
  • Acid rain
  • Weathered/dull paint
• METHOD OF APPLICATION: Hand or DA Polisher or Rotary buffer