Feycolor Epoxy Casting Resin

Epoxy Casting Resin

Epoxy casting resin from Feycolor is a high-quality product for casting over a wooden table, bar, tabletop, kitchen countertop or other furniture. This epoxy casting resin is highly transparent, scratch resistant and resistant to UV sunlight, bumps, glasses, dishes or other influences that can cause scratches. Feycolor casting resin can be used by anyone and allows you to make your own epoxy table. This casting resin is also suitable for making an epoxy table with beer caps.

Make your own epoxy table

Making your own epoxy table with casting resin? This epoxy casting resin is ideally suited to make your own epoxy table by casting resin. By making your own epoxy table, you save a lot of costs and can get creative with your wooden table top. After pouring epoxy resin over the table, the top takes on a luxurious glossy appearance and is resistant to scratches, bumps and other signs of use.

Step-by-step plan: how to use casting resin?

Using casting resin is done according to a step-by-step plan. Before you can pour epoxy resin over a table, you must first mix the hardener into the casting resin and stir it well. Handle the instructions below for the Feycolor casting resin.

1. Mix the casting resin with hardener. Be sure to use the correct mixing ratio at all times. Usually this is 2.5 parts casting resin with 1 part hardener.
2. Stir the 2K casting resin thoroughly so that the 2 components are carefully mixed together. Preferably with a machine and stirrer. Make sure you stir casting resin for at least 3 minutes.
3. Pour the epoxy resin into a new can.
4. Now again stir the resin thoroughly for 3 minutes.
5. Pour the resin over the surface.
6. Let the casting resin dry for 2 days.
7. Done!

Order hardener with it!

Feycolor casting resin is a 2 component product to which you must add hardener. This hardener is not included as standard. When buying epoxy casting resin, order the corresponding hardener right away. The casting resin mixing ratio is 2.5 parts casting resin to 1 part hardener.

• Epoxy casting resin 0,55kg = 0,2kg hardener
• Epoxy casting resin 1,1kg = 0,4kg hardener
• Epoxy casting resin 4,4kg = 1,6kg hardener

Available in 3 packages

• 0,55 kg
• 1,1 kg
• 4,4 kg

Characteristics epoxy casting resin - Feycolor

• High quality casting resin epoxy
• Clear transparent
• High gloss finish
• Suitable for small and large castings
• Hardener is necessary to use the product
• Comes without hardener: order hardener right away!