Rust-Oleum SuperGrip Anti-Slip Coating Transparent Floor Paint 5 liters

Rust-Oleum SuperGrip Anti-Slip Coating

Rust-Oleum SuperGrip Anti-Slip Coating is a 1 component easy-to-apply alkyd resin-based anti-slip floor paint that is particularly suitable for treating old and dry concrete floors. Anti-slip floor coating is highly resistant to abrasion, non-aggressive cleaning agents and briefly to lubricating oils.

Making smooth stairs slippery

Rust-Oleum Anti-Slip Floor Coating is primarily used on smooth stairs and floors. Do you have metal stairs or slippery floors in your garage or warehouse? The grip anti-slip coating provides optimal grip while walking on the floor. The slippery staircase solution contributes to a safe environment for everyone.

Anti-slip floor

Applying an anti-slip coating is suitable for any concrete floor. With this, you renovate your existing floor by replacing the top layer with an anti-slip coating. This is usually cheaper than having a new floor installed and you create a durable floor surface that is resistant to moisture, dirt, chemicals and wear and tear.

How do I use the anti-slip coating?

Rustoleum outdoor anti-slip coating is easy to use. Use the steps below.

1. Remove oil, grease and other contaminants with Rust-Oleum 2901 EpoxyShield Floor Cleaner/Detergent or by high-pressure (steam) cleaning in combination with appropriate agents. Sand intact, old coats to ensure good adhesion. Check compatibility with old intact paint coats. During application the surface must be clean and dry.
2. Before use, the paint must be stirred intensively until a good homogeneity is achieved.
3. Apply in a dry and well ventilated environment with brush or roller.
4. Adhesive-free: 6 hours
5. Paintable: 24 hours
6. Fully cured: 1 week

Depending on many factors such as porosity and roughness of substrate and material loss during application, consumption is difficult to estimate.

Features Rust-Oleum SuperGrip Anti-Slip Coating Transparent

• For foot traffic, indoors and outdoors
• Anti-slip additive is premixed in the coating
• For use on old concrete (>2 years), metal and wood
• Dust dry after 6 hours