Rust-Oleum Metal Expert Direct On Rust Metal Paint Satin Gloss 250ml - RAL 1013

Rust-Oleum Metal Expert Direct On Rust Metal Paint Satin Gloss

Rust-Oleum Metal Expert Direct On Rust Metal Paint is a professional corrosion-resistant paint for iron and steel. The metal paint contains a unique 3-in-1 technology: primer, intermediate coat and finish coat in one. Can be applied directly to bare, previously painted or rusty ferrous metal.

Metal paint for indoor and outdoor use

Rustoleum is the specialist when it comes to metal paint. You can use metal paint to give metal a different color. You can also use it to provide a good protective layer on metal. This will protect your metal object from outside influences such as sunlight, water and frost. Also, this special paint helps prevent scratches and rust.

Metal painting

Thanks to its excellent adhesion to the surface to be painted, this metal paint can be applied to most metal substrates without a primer. It also acts as a primer. The metal paint also ensures that the metal surface is protected from rust and water for up to 10 years. This layer is also called the protective layer. Finally, the top coat of this metal paint provides a smooth, scratch-resistant surface finish with optimal coverage. In short, a breakthrough technology that ensures that the metal surface remains beautiful and protected for a long time.

How do I use the metal paint?

Rustoleum corrosion-resistant paint is easy to use without primer or primer. Use the step-by-step instructions below.

1. To determine if the color is suitable, test it in advance on an inconspicuous area. Cover surrounding surfaces to protect them from spray mist. Remove oil, grease and other surface contaminants with a suitable cleaning agent. Remove loose rust by scraping, brushing with a wire brush or sanding. Lightly sand surfaces that have already been painted. For non-ferrous metal and galvanized metal, prime first with Rust-Oleum Metal Expert special adhesion primer.
2. Stir the product thoroughly before applying. Apply the product in 1 to 2 coats with a suitable brush or roller.
3. Dilute two parts metal paint with up to one part Rust-Oleum Metal Expert brush cleaner and thinner to use the product with conventional spray applicators.
4. Make sure the spray gun is set between 25 and 35 psi (approx. 2 bar) and the spray jet is set to full beam width. Shake the spray gun before and during use to ensure even application of paint.
5. Dust dry after 2 hours.
6. Dry after 8 hours. If necessary, a second coat can be applied after 16 hours.
7. Fully cured after 7 days.

Not recommended for use in damp conditions or when the temperature is below 10°C.

Features Rust-Oleum Metal Expert Direct On Rust Metal Paint RAL 1013

• 3-in-1 primer, protector and topcoat
• Apply directly to rusted metal for long-term (color) protection
• Fast drying
• Silky gloss finish 12 years protection
• For indoor and outdoor use