Rust-Oleum Metal Expert Direct On Rust Metal Paint 400ml - RAL 9010

(0)

  1. Complete Your Purchase
  2. Product information
  3. Pros and cons
  4. Specifications
  5. Frequently asked questions
  6. Product reviews
  7. Comparable products
  8. Blogs
Product information

Rust-Oleum Metal Expert Directly On Rust Metal Paint

Rust-Oleum Metal Expert Direct On Rust Metal Paint is a professional corrosion-resistant paint for iron and steel. The metal paint contains a unique 3-in-1 technology: primer, intermediate coat and finish coat in one. Can be applied directly to bare, previously painted or rusty ferrous metal.

Metal paint for indoor and outdoor use

Rustoleum is the specialist when it comes to metal paint. You can use metal paint to give metal a different color. You can also use it to provide a good protective layer on metal. This will protect your metal object from outside influences such as sunlight, water and frost. Also, this special paint helps prevent scratches and rust.

Metal painting

Thanks to its excellent adhesion to the surface to be painted, this metal paint can be applied to most metal substrates without a primer. It also acts as a primer. The metal paint also ensures that the metal surface is protected from rust and water for up to 10 years. This layer is also called the protective layer. Finally, the top coat of this metal paint provides a smooth, scratch-resistant surface finish with optimal coverage. In short, a breakthrough technology that ensures that the metal surface remains beautiful and protected for a long time.

How do I use the metal paint?

Rustoleum corrosion-resistant paint is easy to use without primer or primer. Use the step-by-step instructions below.

  1. To determine if the color is suitable, test it in advance on an inconspicuous area. Cover surrounding surfaces to protect them from spray mist. Remove oil, grease and other surface contaminants with a suitable cleaning agent. Remove loose rust by scraping, brushing with a wire brush or sanding. Lightly sand surfaces that have already been painted. For non-ferrous metal and galvanized metal, first prime with Rust-Oleum Metal Expert special adhesion primer.
  2. Shake the spray can until you hear the mixing ball, then keep shaking vigorously for one minute (also shake regularly during use).
  3. From a distance of 30 cm, spray the paint evenly onto the surface with back and forth movements, so that the individual strips overlap slightly.
  4. You achieve the best results if you always keep the can at the same distance from the surface while spraying and move it constantly.
  5. Apply several thin coats and let them dry for a few minutes in between.
  6. Dust dry after 30 minutes.
  7. Cured after 24 hours.
  8. Re-sprayable within 1 or after 24 hours.
  9. After use, turn the spray can upside down and spray for 2 to 3 seconds to clean the nozzle.

Apply only at temperatures between 10 and 32 °C and at a relative humidity lower than 85 %. Be particularly careful when preparing wood or metal surfaces with coatings dating back to the 1960s. These surfaces may contain lead and be harmful to health. Never inhale dust when dry sanding. Wear an appropriate protective mask.

Features Rust-Oleum Metal Expert Direct On Rust Metal Paint RAL 9010

  • 3-in-1 primer, protector and topcoat
  • Apply directly to rusted metal for long-lasting (color) protection
  • Fast drying
  • Smooth high gloss finish 12 years protection
  • For interior and exterior use
Full product information

Pros and cons

  • 3-in-1 primer, protector and topcoat.
  • Apply directly to rusted metal for long-term (color) protection
  • Fast drying
  • For non-ferrous metal and galvanized metal a primer is necessary

Specifications

SKU 21500.BX.0.4
Brand Rust-Oleum
EAN 5413436071370
Category Metal paint

Frequently Asked Questions

Product reviews

0/5

Based on 0 review

Write your review