Rust-Oleum Metal Expert 3-in-1 Anti Rust Primer 400ml

Rust-Oleum Metal Expert 3-in-1 Anti Rust Primer

Rust-Oleum Metal Expert 3-in-1 Anti Rust Primer is a professional anti-corrosion primer for ferrous metal. The fast-drying anti-corrosion primer provides the perfect base coat on which to apply a water- or solvent-based metal paint. Metal is a difficult surface to paint and only becomes more difficult if a metal primer is not used.

Metal primer

When do you use an anti-rust primer? Primer is the primer and the first coat you apply to the surface to be painted. By applying this layer, you allow the paint to adhere better to the surface. This provides better coverage and a nicer end result. A corrosion-resistant primer provides a good rust-preventing initial layer, which you can then paint over even more easily. By using a rust primer on rusting metals such as steel and iron, you can be sure that the surface will remain rust-free for a very long time.

Painting metal

Painting metal starts with the right pre-treatment and a good metal primer is indispensable! Rustoleum offers a wide range of metal paints for all metals. Metal surfaces deserve the right treatment so you can enjoy the material for as long as possible. Before you start painting metal, you need to primer the surface. A metal primer ensures the adhesion of paint to the metal, and it also resists rusting.

How do I use rust primer?

1. Make sure the surface to be painted is free of paint residue, rust, oil and grease. Sand already painted surfaces first for better adhesion. Cover surrounding surfaces to protect them from spray mist.
2. Shake the spray can until you hear the mixing ball, then keep shaking vigorously for one minute (shake frequently during use as well).
3. From a distance of 30 cm, spray the paint evenly onto the surface with back and forth movements, so that the individual strips overlap slightly.
4. You achieve the best results if you always keep the can at the same distance from the surface while spraying and move it constantly.
5. Apply several thin coats and let them dry for a few minutes in between.
6. Dust dry after 30 minutes.
7. Cured after 24 hours.
8. Re-sprayable within 1 or after 24 hours.
9. After use, turn the spray can upside down and spray for 2 to 3 seconds to clean the nozzle.

Apply only at temperatures between 10 and 32 °C and at a relative humidity lower than 85 %. Be particularly careful when preparing wood or metal surfaces with coatings dating back to the 1960s. These surfaces may contain lead and be harmful to health. Never inhale dust when dry sanding. Wear an appropriate protective mask.

Rust-Oleum Metal Expert 3-in-1 Anti Rust Primer features

• Red-brown
• High quality
• Fast drying
• Anti-corrosion
• 3-in-1 rust stopper, primer and primer in one
• Can be applied directly to rust and bare ferrous metals
• For indoor and outdoor use