Rust-Oleum EPOXYSHIELD Concrete Repair Mortar - 10kg

(1)

Rust-Oleum EPOXYSHIELD Betonreparatiemortel - 10kg
  1. Product information
  2. Specifications
  3. Product reviews
  4. Comparable products
Product information

Rust-Oleum Concrete Repair Mortar

Rust-Oleum EPOXYSHIELD Concrete Repair Mortar is a powdered repair product on cement base and resins for inside and outside use. For leveling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork.

Surface preparation

On bare substrate: clean with steel brush or sand blaster. The substrate must be solid and free from dust, oil and grease. Porous substrates must be moistened first. Metal parts are to be treated with an anti-rust primer.

What does Rust-Oleum 203012.10 Concrete Repair Mortar contain?

Mixing ratio: Approximately 5 parts of powder to 1 part of water (2 liters water for the entire 10 KG). Fill the container with the water. Add the dry mortar to the water whilst stirring. Mix water and powder thoroughly to a thick smooth, lump-free substance. Add some water to your liking if the mortar is too dry. Application: Apply the product with the included trowel or spatula up to a maximum layer thickness of 2 cm. Wet the trowel to smooth out any trowel marks or irregularities. After 48hours the surface can be sanded using a rough sandpaper (P120) to obtain a smooth result.

Features Rust-Oleum EPOXYSHIELD Concrete Repair Mortar

  • Fills large cracks and holes
  • For concrete, cement and brickwork
  • Indoor and outdoor use
  • Can be sanded after curing
  • Paintable with a floor coating or concrete paint (not with Rust-Oleum 7100)
  • With trowel and spatula
  • Consumption: +- 0,4 square meters (wih a layer thickness of 2cm)
Full product information

Specifications

SKU RO-203012.10
Brand Rust-Oleum
Contents 10kg
Packaging per piece
EAN 8715743015250
All specifications

Product reviews

5/5

Based on 1 review

Write your review
Wonderful product
We used the concrete repair mortar to repair a concrete ceiling with concrete. We had cleared and treated the iron beforehand. We initially had some concerns regarding the mortar, whether it would stay in place on that ceiling. The product in the bucket is divided into two bags. That way a smaller quantity could be made up first. The mortar itself is an extraordinary mortar with exceptional adhesive and bond strength. The mortar was applied in one go and did not need to be supported in any way, although it is advisable to work in several layers of about 2 cm maxi per layer. We are very satisfied with the product and order more. We had few reservations because the product was recommended by a specialized company.
Lucas S |
Translated from Dutch
Comparable products