Rust-Oleum CombiColor Multi-Surface Satin-Gloss RAL9016 - 750ml

Rust-Oleum CombiColor Multi-Surface

Rust-Oleum CombiColor Multi-Surface 7300 Coating is a primer and topcoat in one suitable for a variety of substrates. The white paint has a silk-gloss finish and is based on a modified alkyd resin. High gloss paint is lead, chromate and zinc free.

Suitable for different surfaces

Rust-Oleum Multi Surface 7300 has excellent adhesion and can be used on various substrates such as wood, metal, mdf, plaster, tiles, various types of hard plastics, aged concrete, etc.

RAL colors

Rust-Oleum CombiColor colors have high hiding power, very good adhesion to different substrates. Each color can be applied without primer or primer.

• RAL7001 (silk gloss)
• RAL7016 (high gloss)
• RAL7035 (high gloss)
• RAL9001 (silk gloss)
• RAL9005 (matt & high gloss)
• RAL9010 (high gloss)
• RAL9016 (silk & high gloss)

How do I use CombiColor paint from Rust-Oleum?

Remove oil, grease and all other contaminants by alkaline or high pressure (steam) cleaning in combination with appropriate agents. Remove rust crusts, loose rust, loose roller skin and loose paint layers by scraper and/or wire brush. Sand intact old paint layers to ensure good adhesion

1. Before use, we recommend applying a small test area to determine if the product is suitable for the respective substrate.
2. Stir the paint for at least 2 minutes for good homogeneity.
3. Temperature of air, substrate and coating between 5° and 35°C and relative humidity below 85%. The temperature of the substrate must be at least 3°C above the dew point.
4. Apply the 2 coats of paint with a brush or roller.
5. Thinning is usually not necessary.
6. Paint brush: use long-haired natural bristle brush.
7. Paintroller: use short-haired polyamide (6-12mm) rollers.

Features Rustoleum CombiColor Multi-Surface

• High quality paint
• Available in different colors and gloss levels
• Can be applied without primer or undercoat
• Dust-dry after 2 hours at 30°C
• Lead and chromate free