Raptor Liner Tough & Tintable body liner 2K paint set

Raptor Liner Tough & Tintable body liner 2K paint in any shade you want

Raptor Liner Tough & Tintable is a complete set consisting of tintable body liner paint, hardener, mixing cup and instructions. This liner is specially designed for long lasting protection of the bed liner, boot or underbody of your van, truck, pick-up or other vehicle with a solid non-slip hammered look in the colour of your choice. The Tough & Tintable sets are available in 1 litre and 4 litres. This versatile product can be applied with a paint roller or spray gun.

Body liner in the colour of your choice 

The Raptor Liner Tough & Tintable body liner coating allows the user to choose their own couleur body liner. Do you want the bed liner to be in a specific colour with a hammered structure that prevents scratching and slipping? Then check out this Tough & Tintable set from Raptor Liner for a customised refurbishment of your bed liner. Tough & Tintable by Raptor Liner is durable, wear resistant, scratch resistant, water resistant and UV resistant. You can enjoy it for years to come. The product protects these sensitive areas against rust, corrosion, salt, acids etc.  It is also possible to add Raptor Liner's anti-skid additive Traction to the last coat to obtain additional anti-skid properties.

How much paint do I need?

You want to buy the Raptor Liner Tough & Tintable to renovate and protect your car's body lining? Then don't forget to also order paint in the desired colour to mix with the Tough & Tintable liner. The amount of paint you need depends on the amount of bed liner you wish to apply. We recommend adding 10% of coloured paint or 100ml to each litre of Raptor Liner Tough & Tintable.

How do I apply Raptor Liner Tough & Tintable?

Raptor Liner Tough & Tintable is applied with a spray gun or paint roller. Follow the tips below.

1. Sand the surface first.
2. Is there any rust? Treat with a rust converter.
3. Apply the right primer.
   • Aluminium, iron and other metals: Raptor Liner reactive primer or epoxy.
   • Plastic: Raptor Liner Adhesion Promoter Primer.
   • Existing paint or varnish: A light sanding is normally sufficient, provided you do not sand through the primer.
4. Add 10% colour paint to each litre of Tough & Tintable coating.
5. Mix the hardener thoroughly into the coating.
6. Shake or stir the components thoroughly for at least two minutes.
7. Place the well-mixed product in the spray gun cup or paint roller tray.
8. We recommend applying at least 2 to 3 coats: allow 60 minutes evaporation time between coats.
9. The body liner paint should cure for at least 24 hours after the last coat.
10. For best results, work at room temperature and in a dust-free (closed) space.

Matt, gloss or satin?

Tough & Tintable usually dries matt to satin. The gloss level of the Raptor Liner can be varied by the number of bars used and the distance between nozzle and substrate. Use the following to achieve the desired result.

• Matt: 5 to 7 bar. Keep a distance of 70-80 cm between nozzle and substrate
• Glossy: 2 to 3 bar. Maintain a distance of 40 to 50 cm between nozzle and substrate
• Satin/matt: 3 to 5 bar. Maintain a distance of 50-60 cm between nozzle and substrate

Adheres to most surfaces

Raptor Liner Tough & Tintable will adhere to any surface with existing paint, varnish or primer that has been sanded and degreased. The coating can be applied to the following substrates.

• Steel
• Plastic
• Galvanised steel
• Iron
• Wood
• Concrete

How is the Raptor Liner Tough & Tintable set delivered?

You can order the sets in 1 litre and 4 litre packs. When you purchase the Raptor Liner Tough & Tintable set, you will receive the following products.

• 1 litre
  • (1x) tintable coating 750ml
  • (1x) hardener 250ml
  • (1x) mixing cup
  • (1x) instruction manual
  • Packed in a Raptor Liner cardboard box
• 4 litres
  • (4x) tintable liner 750ml
  • (1x) hardener 1 litre
  • (1x) mixing cup
  • (1x) instruction manual
  • Packed in a Raptor Liner cardboard box