PPG 2K Etch Primer 400ml

PPG 2K Etch Primer Aerosol

PPG 2K Etch Primer Spray is a wash primer with a very fast flash off, easy application, fine overspray and 5 day pot life. PPG 2K Etch Primer spray can adheres to surfaces such as bare metal, aluminum, stainless steel, filler, old paint layer etc. 

PPG 2K Chromate Free Wash Etch Primer

PPG 2K Etch Primer has a pot life of 5 days! The advanced technology used in this aerosol enables premium quality repairs with the convenience of an aerosol. Etch primer delivers a constant, fine atomisation with a spray pattern similar to a spray gun, providing the same ease of use, quality of finish and durability of 2 component premium products.

PPG 2K Etch Primer Spray can be used on many surfaces

• Bare steel
• Galvanised steel
• Zintec
• Aluminium and alloys
• Electropaint
• Aged painted surfaces
• Fiberglass
• Polyester filler

Flash off time 2K Etch Primer

The drying time of PPG Etch Primer depends on various factors such as paint layer thickness, temperature and humidity.

• Before recoat at 20°C
  
  • 15 minutes depending on drying conditions and film thickness
• Recoat at 20°C
  • 15 minutes

2K Aerosol Technology

1. Shake well before use (approximately 2 minutes).
2. Remove the red button from cap and add it to bottom valve.
3. The hardener is mixed with the product when pushing the red button at the bottom valve.
4. The mix is sprayed out through the nozzle thanks to the propellant technology.

Features PPG D8470 2K Etch Primer Aerosol

• Powerful adhesion
• Propellant technology
• Easy to spray
• Quickly evaporates
• Long pot life
• Corrosion & rust resistant
• Sprayable with any 1K or 2K car paint