PPG 2K Epoxy Primer 400ml

PPG 2K Epoxy Primer Aerosol

PPG 2K Epoxy Primer is a multi-mode 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal. PPG D8410 has good adhesion to a wide variety of suitably prepared substrates. These include bare and galvanised steel, aluminium, painted surfaces and fillers.

Epoxy Filler in 2K spray can

PPG 2K Epoxy Primer Paint is the most professional filler for car parts. PPG epoxy surfacer has excellent filling properties and can easily be sanded to a smooth surface. Thanks to the epoxy that is incorporated in the filler, the PPG epoxy primer offers excellent protection against rust and corrosion.

PPG 2K Epoxy Primer Spray can be used on many surfaces

• Bare steel
• Galvanised steel
• Aluminium and alloys
• Polyester filler
• Old paint layers

Tips for Spraying 2K Epoxy Primer Paint

1. Ensure that the spray can is correctly "activated" before use (see below).
2. Spray distance 15 to 20cm.
3. Make sure the room and surface temperature is around (15 - 25°C).
4. The spray can should also be at room temperature.
5. Apply a 25 to 30 micron layer, followed by a medium layer.
6. Allow the epoxy filler to evaporate between 15 minutes.
7. Store the spray can upside down.
8. Sprayable after approximately 60 minutes.
9. Hold the aerosol upside down and empty the valve.

2K Aerosol Technology

1. Shake well before use (approximately 2 minutes).
2. Remove the red button from cap and add it to bottom valve.
3. The hardener is mixed with the product when pushing the red button at the bottom valve.
4. The mix is sprayed out through the nozzle thanks to the propellant technology.

Features PPG D8410 2K Epoxy Primer Filler Spray

• Powerful adhesion
• Propellant technology
• Easy to spray
• Quickly evaporates
• Corrosion & rust resistant
• Sprayable with any 1K or 2K car paint
• Easy to sand; wet or dry