Plastic Primer SprayMax aerosol

SprayMax Plastic Primer aerosol

Plastic Primer SprayMax aerosol is a 1-component plastic primer that dries very fast. SprayMax plastic primer aerosol is the best adhesion layer for automotive paint on the plastic parts of cars, trucks, motor homes etc. A light, thin and even coat of plastic primer is sufficient for optimal adhesion of your paint to plastic!

Plastic bumper spraying?

Do you have a new plastic bumper and want to spray it with automotive paint? For the best and long-lasting adhesion of the paint on your plastic bumper, we advise you to spray a plastic adhesion primer first at all times. This SprayMax aerosol platic primer is easy and quick to spray on all plastic car parts. Make sure the surface is clean and sanded lightly. Then spray this plastic primer and after 10 minutes it will be dry and ready to be sprayed with your desired car paint.

Features of SprayMax plastic primer aerosol

• Can be applied in a very thin layer
• Good adhesion properties
• Very fast drying
• Re-sprayable after 10 minutes
• Highly elastic
• Color: colorless, mixed with silver pigments
• Excellent adhesion on all plastic parts
• High elasticity
• Very fast drying
• Easy to use and therefore time-saving
• Overpaintable with all professional primers and topcoats such as 2K color paints and both 1K color solvent-based and water-based paints.
• Consumption: approx. 6m ² - 8m ² per spray can depending on layer thickness and substrate.

How do I use SprayMax plastic spray primer?

Before you start, we advise you to clean and degrease the surface at all times with SprayMax silicone remover. This will make the plastic surface to be treated free of dust and grease after which you can lightly sand it. After this, shake the spray can well for 2 minutes. Always spray a test piece before you start spraying. Keep asl spray distance approximately 25cm. 1-2 thin layers (1-2 μm) are sufficient.

Drying time SprayMax plastic primer

• Dust dry: 10 minutes at 20°C
• Recoatable: 10 minutes at 20°C

Tip:

• Wear personal protective equipment (respiratory protection Type: A2/P2, safety gloves such as e.g. latex or nitrile)
• After spraying, we recommend that you turn the spray can upside down and empty the built-in suction tube.