Sound insulation car

Why use sound insulation?

Why you want to use sound insulation in your car depends on what result you want to achieve. Reasons to insulate sound in your car is when you have new speakers, speakers or an entertainment system installed and you want music to sound its best without vibrations or thumps. Another reason to use sound insulation is when the car is a little older and there is loud noise coming from the engine compartment or wheel wells. By placing special insulating products in your car, sound is dampened and vibrations are minimized. This in turn increases driving pleasure!

Sound insulation car. Which products do I need?

Do you want to increase sound insulation in your car? Then you need special products that dampen the interior and exterior noise. The best product for car sound insulation is a bitumen anti-drum plate with self-adhesive properties. At CROP you can buy all car sound insulation products that allow you to insulate your car against noise, sound and vibration yourself. Choose from the products below:

• antidrum sheets
• Soundproof foam
• Bitumen sheets

Soundproofing sheets

Bitumen-based anti-drumsheets are the best product for soundproofing in the car. A bitumen anti-drum sheet is considered as adhesive sound insulation for the car. On the back side, anti-drum sheets have an adhesive layer that is self-adhesive which allows you to easily install the bitumen soundproofing mats in the car. An anti-drum plate can be cut or cut to size so you can stick the soundproofing mats where you want soundproofing in the car. Because bitumen anti-drum sheets are heat-resistant, they can be used as sound insulation in the engine compartment of the car.

Step-by-step plan: installation of car sound insulation

You can install sound insulation in your car in a few simple steps. With the step-by-step plan below you can install sound insulation in your car yourself with the right products. Do you have any questions about the installation of car sound insulation? Please contact our product specialists; we can help you with the best sound insulation in your car, camper or caravan.

1. Clean and degrease the surface to which you want to apply sound insulation. Use a high-quality degreaser. This will remove dirt, grease, glue residue and other contaminants.
2. Take a bitumen anti-drum board and check that the size is right. If necessary, you can cut or trim the soundproofing mats to size.
3. Remove the film from the self-adhesive soundproofing so you can stick the adhesive layer.
4. Apply the anti-noise board to the spot and press it well so that it stays firmly in place. Remember to press the corners and edges well for the best fastening.
5. Let the soundproofing mats dry for at least an hour at 20 degrees Celsius so that the adhesive can adhere well to the surface. Only after this can the product be loaded, if necessary.
6. Done!

Sound-absorbing foam

Sound dampening foam is a spray can of foam that you can spray on the areas where you want to dampen sound. By spraying sound dampening foam into your car, vibrations and loud noises on the inside of your car are isolated. Thanks to the spray can, you can easily apply this soundproofing, even in places that are hard to reach. Because this foam is sound dampening, it is used as sound insulation in the car where bitumen anti-drum boards cannot reach such as cracks and cavities. Want to buy high-quality soundproofing foam? Then choose the TEROSON PU 9500 spray can.

Self-adhesive sound insulation for cars

Self-adhesive sound insulation car is known for its ease of use. Because this car sound insulation is self-adhesive, you do not need any glue or sealant. Remove the foil from the self-adhesive sound insulation and apply it in the car by pressing on the anti-drone plate. Before applying the adhesive sound insulation to the car, we recommend that you first clean the surface well with a degreaser. This removes stubborn dirt, grease, oils and other deposits. This makes the sound insulation mats stick better to your car's bodywork.

Sound insulation of car wheel arches

Want to improve the sound insulation in wheel arches of your car? Then use a bitumen anti-drumming sheet! You can apply this self-adhesive sound insulation in the wheel arches of the car which will dampen the sound of tires and vibrations. These anti-drum sheets have a self-adhesive adhesive layer so you can easily install them in the wheel well yourself. The soundproof mats are resistant to all weather conditions, salt, rain and stone chips.

Sound insulation in the engine compartment of motor homes and cars

Sound insulation in the engine compartment of a motorhome and car is very important. Because the engine makes noise, this can cause noise inside the motorhome or car while driving. By adding sound insulation to the engine compartment of your motorhome or car, loud noises and vibrations are dampened. As a result, engine noise will not bother you as much while driving, making it quieter and more comfortable. Use bitumen anti-drum sheets for the best sound insulation in the engine compartment of your RV and car.