MoTip Wheel Spray Paint SILVER METALLIC - 500ml

(14)

MoTip Velgenzilver in Spuitbus 500ml - Professional Rally
  1. Complete Your Purchase
  2. Product information
  3. Specifications
  4. Product reviews
  5. Comparable products
Product information

MoTip Wheel Spray Paint SILVER

MoTip Wheel Spray Paint SILVER is a fast drying acrylic lacquer with a lasting gloss. This gloss silver metallic spray paint offers good coverage, excellent adhesion and good surface hardness. The MoTip Wheel Spray Paint in silver metallic high gloss is specially made to renew and repair steel or other light metal rims and hubcaps of your car. The high gloss silver wheel spray paint is resistant to scratches, petrol, chemicals, the weather and is UV-resistant. For the best result we advise to use a 2K clear coat as a varnish.

How to paint rims silver metallic

Always wondered how to paint rims silver metallic? In just a few simple steps you can use this gloss silver spray paint for wheels to give the rims a new metallic silver color!

  1. Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of MOTIP primer suitable for the surface. After drying, sand the base layer (grain 600).
  2. Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.
  3. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30cm.
  4. Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
  5. In order to obtain high gloss, apply a finishing coat of 2K clear coat.
  6. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
  7. The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Features MoTip Wheel Spray Paint SILVER METALLIC

  • Non-fading and UV-resistant
  • Fast drying
  • Good coverage
  • Resistant to petrol, chemicals and weather influences
  • Good surface hardness
  • Lasting gloss
  • Wear-resistant and scratch free
  • Excellent adhesion
Full product information

Specifications

SKU M04007
Brand MoTip
Paint component 1K (1-component)
Contents 500ml
Packaging per piece
All specifications

Product reviews

4.95/5

Based on 14 reviews

Write your review
Nice result, very satisfied
Last weekend I sprayed my aluminum rims with very nice results. The paint can gives a nice spray flow, very little tendency to sag and good coverage. Nice even color, even if you slobber a spot; the metallic edge pulls away by itself. Even the deeper nooks and crannies are nicely covered without sagging. Fast drying and can be oversprayed with clearcoat after 1 to 2 hours. The recommendation is to shake for 10 minutes before use, which nobody does. 1 minute turns out to be sufficient. Sanded through edges of the old paint rippled up slightly in the primer and paint. In between (after an hour of drying the burnt out primer edges extremely gently sanded with a loose firing 1000grid. When the can is almost empty the flow decreases and the nozzle may splatter a bit. It is difficult to search/find the instructions on the site. The information on the canister is too small to read and gives little practical information. No information on whether-not necessary to sand the primer before applying the opaque coat, I did not sand because I expect the opaque coat to adhere to the fresh primer. Also another clear coat over the paint which gives a very nice and fuller gloss.
Theo |
Translated from Dutch
good quality for a good price
This rimspay covers well and has good adhesion
Peter |
Translated from Dutch
By itself
In itself good. Just a little lack of pressure and cramp in my fingers to keep the nipple pressed down. Had some splashes when holding it at an angle. Delivery top and fast.
Berry |
Translated from Dutch
Comparable products

Other product categories