MoTip Sanding Guide Black spray 500ml

MoTip Sanding Guide aerosol can

MoTip Sanding Guide spray can is a quick drying black control lacquer and serves as an aid during sanding. The spray can of control lacquer can be used to check the sanding result. Some scratches, bumps and bulges are not immediately visible. This control powder lacquer is ideal for marking putty and primer surfaces, to act as a so-called control layer during sanding. The unique composition ensures that it can already be sanded after 5 to 10 minutes without filling up your sandpaper!

How do I use MoTip Sanding Guide spray?

The surface should be clean, dry and grease-free. The spray can should be used at room temperature. Best temperature is between 15 - 25°C. Shake the spray can well before use and spray a test piece first. The ideal distance from the object is about 25 - 30 centimeters. Apply a thin coat of sanding guide and let it dry. Sand the surface until the control spray is completely gone.

Universally applicable

MOTIP Sanding Guide is an excellent matte black paint with a low chalk content that makes it easy to sand and therefore ideal for use as a control paint. Because of its original factory color, MOTIP Control Paint is also ideal for spraying matte black parts. In addition, it is very good to apply the product in multiple layers.

Done?

Clean the nozzle after use (turn the spray can upside down and press the nozzle for about 5 seconds). The drying time depends on the ambient temperature, humidity and thickness of the paint.

Technical data MoTio Sanding Guide aerosol

• Nitro cellulose lacquer
• Black color
• VOC: 92%
• Coverage: 3 to 4 m2 per spray can
• Can be sanded after 5 to 10 minutes