MoTip Removeable Coating glossy white - 500ml aerosol

MoTip Removeable Coating glossy white removable film spray

MoTip Removeable Coating is a glossy white removable film that can be sprayed on to temporarily re-colour body parts, wheel rims, mirror caps or other surfaces. Do you want to restore the original colour? Then the MoTip white film is easy to remove by just peeling it off.

MoTip white glossy removeable coating spray

The MoTip Removeable Coating glossy white coating is packaged in a 500ml high coverage aerosol can. The can has a spray nozzle that you can rotate 360 degrees. This means that you always have the right spray angle. Thanks to the high quality, you can easily remove the MoTip film whenever you want. Removeable Coating adheres to most materials, substrates and surfaces such as metals, aluminium, iron, steel, plastic, glass and wood. We do not recommend using this product on 1K paint.

How do I apply the glossy white coating?

MoTip's Removeable Coating is a glossy white film that is easy to spray onto various surfaces. In a few simple steps, you can spray MoTip's Removeable Coating yourself to achieve a beautiful white gloss finish.

1. Before you start applying the film, it is important that the surface you are going to spray on is clean, dry and free of grease. Use a good degreaser for this.
2. As this is a removable finish, you do not need to apply a primer.
3. Make sure the spray can is at room temperature. The substrate and environment should also be between 10°C and 25°C. This allows the product to flow properly.
4. Shake the can well for 3 minutes.
5. Always spray a sample before starting to see if it has the desired effect.
6. Keep a distance of 25-30 cm between the nozzle and the surface while spraying.
7. Apply at least 5 coats with a 5 minute evaporation break at 20°C.
8. To prevent the MoTip film from cracking during shrinkage, apply an extra coat in critical areas. For example corners, edges and curves.
9. After the last coat, the whole thing must be allowed to dry thoroughly. The curing time depends on the thickness, humidity and ambient temperature.

Features of the MoTip Removeable Coating glossy white film

• Glossy white finish
• Light white colour
• Weather resistant
• Fast drying coating
• Easy to remove coating
• Excellent adhesion to most surfaces (except 1K paint)
• Easy to apply
• Resistant up to 100°C
• Drying time:
  • Dust free: 20 min at 20°C
  • Manageable: 30 minutes at 20°C
  • Completely dry: after approx. 1 hour at 20°C