MOTIP Oversprayable Stone Chip in 1 liter Underscrew Can

MOTIP Anti Stone Chip in a 1.000ml under-screw can processing with UBC spray-gun is protection for the bottom and visible body parts of vehicles. Anti-gravel is paintable with all paint systems and has excellent anti-corrosion effect. Anti-gravel resists weathering and weak acids and bases, absorbs sound and remains elastic.

MOTIP Anti Stone Chip is available in three colours, black, grey and white.

The following colors may show for technical reasons on each screen differently. They serve only as indications and therefore cannot be legally binding.

High quality protection for the bottom and visible body parts of vehicles.

Product Features

• Process with UBC Spray Gun
• Sprayable with all paint systems
• Permanently elastic
• Very good adhesion
• Weather resistant
• Resistant to weak acids and bases
• Excellent corrosion prevention
• Silencing

Features

• VOC content (%): Approximately 50% w / w
• Yield: 2 to 3 m²
• Dust-dry: after about 30 minutes
• Touch: after about 60 minutes
• To recoat: After about 2 hours

User

1. Before use, read the instructions on the package and follow them.
2. Remove loose old paint and rust and sand the surface.
3. The surface must be clean, dry and free of grease.
4. Take the can to room temperature.
5. Processing temperature 15 to 25 ° C.
6. To use the bus shake for 2 minutes and spray a sample.
7. Operating pressure: 4 to 5 Bar
8. Distance to the surface approximately 25 to 30 centimetres treat
9. Anti-Stone Chip makes changes to the desired thickness.
10. After drying, without sanding paintable with all paint systems.
11. After use, clean the spray gun with turpentine.
12. The drying time depends on the ambient temperature, humidity and film thickness.