MOTIP Marking Spray in 600ml Aerosol for Manual Use

Product Features

• Very high opacity
• Abrasion-resistant
• Resistant to petrol, chemicals and weather influences
• Durable adhesion
• Fast drying
• For manual use

Features

• Base: Acrylic resin
• VOC content: Approximately 70% w/w
• Solid content: Approximately 30% w/w
• Yield: Approximately 60 meters
• Hardness After 16 hours

Use

1. Before use, carefully read the directions on the packaging and act.
2. The surface must be clean, dry and free of grease.
3. The aerosol at room temperature.
4. Ideal processing temperature 15 to 25 ° C.
5. Before using shake the aerosol well for 2 minutes and spray a sample.
6. Apply the marking spray in the desired width.
7. After use, clean the valve (spray upright and hold the nozzle for about 5 seconds).
8. The drying time depends on the ambient temperature, humidity and film thickness.