MoTip Leather Paint beige - 200ml aerosol

MoTip Leather Paint in beige colour

MoTip leather paint in beige is a high quality finish for painting leather. The leather paint dries quickly and remains soft and elastic even after it has dried completely. The paint is of professional quality, so that the colour and shine remain beautiful for a long time while the original structure of the leather is retained.

When to use MoTip leather paint?

MoTip Leather Paint in beige can be used universally for many applications: leather, Skai, vinyl and more. You can use it to paint a leather sofa or armchair, but the paint is also suitable for spraying a dashboard, a car seat or the automobile upholstery.

Do you want to apply beige leather paint?

Do you want to spray MoTip leather paint in the colour beige on a leather surface? Make sure you apply it in thin coats so that it dries to a satin matte finish. With thicker coats of paint, the gloss level increases slightly, making the leather surface shinier. Use the step-by-step plan below to properly apply this finish.

1. Before you start painting the leather, make sure the surface is clean, dry and free of grease.
2. Make sure the environment is between 15 and 25ºC.
3. Shake the spray can vigorously for at least 2 minutes.
4. Lightly sand the leather to be sprayed with P400 or P600 and degrease.
5. Always spray a sample before starting to see if it has the desired effect. Choose an inconspicuous place for this.
6. Keep a distance of 25-30 cm between the nozzle and the surface while spraying.
7. Apply the leather paint in several thin layers.
8. Keep shaking the spray can between coats! This is very important for the quality and pattern of the spray.
9. Finished spraying? Turn the can upside down and push the nozzle until only the propellant comes out.

Features of the MoTip Leather Paint beige

• High quality leather paint
• Long lasting colour retention
• Matt satin finish
• Fast drying leather paint
• Remains elastic and supple
• Good adhesion
• Retains the original structure of the leather
• Drying time:
  • Dust free: 10 min at 20°C
  • Completely dry: after approx. 2 hours at 20ºC
  • Please note that the drying time is influenced by the layer thickness, temperature and humidity
• Heat resistant up to 50°C
• Coverage: approx. 1m²