MOTIP CARAT Primer in 400ml Aerosol

MOTIP CARAT Primer in 400ml Aerosol

MOTIP Carat Primer in a 400ml Aerosol is a high quality and fast drying primer for priming of treated and untreated wood, metal, aluminium, glass and stone. Suitable primer as pre-treatment before coating with alkyd resin, nitro cellulose, 1-K acrylate and 2-K acrylic lacquers. The primer has a very high coverage- and filling power and good corrosion resistance. CARAT Primer has a high flow resistance and is easy to sand, both wet and dry (from 400 grit). Available in 2 colours: white and grey

Product Features

• Fast drying
• Very high coverage and filling
• Good corrosion protection
• High persistence
• Good sand, both wet and dry (from 400 grit)
• Sprayable with all paint systems
  

Physical and Chemical Properties

• Content: 400 ml
• Base: Acrylic resin
• Colour: White and Gray
• VOC content: Approximately 84% w / w
• Solids: Approximately 16% w / w
• Yield: 1.25 to 1.75 m²
• Dust dry: After 5 to 10 minutes
• Touch: After 10 to 20 minutes
• Hardened / recoat: After 2 hours
• Heat resistant: Up to 110 ° C

How to Use

1. Before use, read the instructions on the package and follow them.
2. The surface must be clean, dry and free of grease.
3. Remove old loose paint and rust and abrasion.
4. The surface must be clean, dry and free of grease.
5. The aerosol at room temperature.
6. Ideal processing temperature is 15 to 25 ° C.
7. Before use, shake the aerosol for 2 minutes and spray a sample.
8. Distance to the to be treated surface approximately 25 to 30 centimetres.
9. Apply the primer in several thin layers.
10. Before applying the next layer, again shake the aerosol.
11. After use, clean the valve (aerosol upside down and the nozzle for approximately 5 seconds). The drying time depends on the ambient temperature, humidity and film thickness.