MoTip 2K High Gloss Clear Coat spray 200ml

MoTip 2K Clear Coat aerosol

MoTip 2K Clear Coat aerosol is a high gloss varnish that is fast drying and scratch resistant. This 200ml spray 2K clear varnish of MoTip can be applied over water-based paint and lacquer containing thinner, to protect it for a long time against external influences. In addition, you can spray the MoTip 2K clear coat over wood, plastic, metal, steel, stainless steel, aluminium, brass, copper and even chrome.

How to spray MoTip 2K clear coat?

You can spray the MoTip 2K clear coat in 7 easy steps. To use the MoTip 2 component clear coat in the right way, follow the steps below.

1. To mix the hardener with the clear coat, place the spray can upside down on a flat surface.
2. Remove the cap from the bottom of the spray can.
3. Remove the metal ring from the cap and twist it into the pen.
4. At the bottom of the spray can, pull the pen out as far as possible.
5. The spray can should be at room temperature (best application temperature is 10 to 25°C).
6. Shake the spray can for 2 minutes before use and spray a sample.
7. The distance to the surface to be sprayed should be about 20cm to 25cm.
8. Use within 24 hours after activation.

Features MoTip 2K Clear Coat spray 200ml

• High gloss 2K clear coat that dries fast
• Clear coat is UV resistant and does not yellow
• Resistant to petrol, diesel, chemicals and weather influences
• Yield of 200ml is 0.35 to 0.5 m²
• Dust-dry after 30 minutes
• Dry to the touch after 8 hours
• Cured after 24 hours
• Caution, do not apply over synthetic resin paint
• Spray should be used within 24 hours of activation