MIPA Rostschutz Winner red-brown rust protection primer - 400ml aerosol

MIPA Winner red-brown rust protection primer in a practical aerosol can

MIPA Rostschutz Winner is a red-brown primer with rust protection properties for metals: aluminium, steel, iron, etc. This anti-rust primer spray dries quickly and has a very good adhesion to the surface. Rostschutz has a high filling capacity so that irregularities such as scratches, dents and other small surface irregularities are filled. This primer dries very quickly and it is possible to sand the primer after only 30 minutes of drying.

Anti-corrosion primer

This is a special primer with rust protection for long-term metal protection. You can spray the Rostschutz primer directly onto bare metal or onto existing paint that has been sanded and degreased. After spraying the rust protection primer, the metal is well protected and resistant to rust and corrosion. Due to its high quality, this MIPA product is known as an easy to spray and low consumption primer.

Do you want to spray a rust protection primer?

Follow the step-by-step plan below on how best to apply this primer. MIPA's Rostschutz is well known as an easy-to-spray rustproofing primer.

1. Shake the can vigorously before use until you hear the mixing beads move freely.
2. Use at temperatures between 15 and 25ºC.
3. Maintain a spray distance of 20-30 cm from the surface.
4. Apply 2 to 3 full coats of primer.
5. Allow 5 minutes of evaporation time between coats.
6. After the last coat, you must allow the paint to harden.
7. Finished with spraying? Turn the can upside down and push the nozzle until only the propellant comes out. Now the nozzle is clean and you can store the remaining primer.

Features of the MIPA Rostschutz Winner red-brown primer with rust protection

• Rust inhibiting primer
• Anti-rust primer
• Fast drying
• High filling power
• Strong adhesion
• Easy to sand
• Can be overpainted with thinner or water-based paint
• Easy to apply
• Drying time of the MIPA Rostschutz red-brown rust protection primer
  • Dust free: 10 min at 20°C
  • Sandable: 30 minutes at 20°C
  • Ready for next coat: 2 to 3 hours at 20°C