MIPA Rapidfiller Spray grey filler primer- 400ml aerosol

MIPA Rapidfiller Spray grey filler primer in a convenient aerosol format

MIPA Rapidfiller Spray is a grey anti-rust primer and filler all in one. Accordingly, this grey primer fills small irregularities in the surface: scratches, cracks, dents, holes, etc. The primer can then be sprayed with 1K paint and then 2K varnish, or directly with 2K paint. The primer adheres perfectly to metals: steel, iron, zinc, aluminium etc. The product dries quickly and is easy to sand after drying.

All-in-one rust protection and filler primer 

A combination of rust protection primer and filler is perfect to prepare your metal painting job. Rapidfiller works as a rust protection primer that protects steel and iron after treatment against rust and aluminium against corrosion. Due to its high quality, Rapidfiller is also a filler primer that fills holes, dents and cracks so that the surface can be sanded smooth again.

Can be covered with all 1K and 2K finishes

Have you sprayed the filler and has it cured? Then MIPA Rapidfiller can be painted over. You can cover the primer with water-based and solvent-based paints. Before spraying the paint, lightly sand the primer with P400 grit to achieve maximum adhesion.

Do you want to apply MIPA Rapidfiller Spray?

Follow the step-by-step plan below on how best to apply it. MIPA Rapidfiller Spray is well known as an easy to spray rust resistant primer.

1. Shake the spray can vigorously before use until you hear the mixing beads move freely.
2. Use at temperatures between 15 and 25ºC.
3. Maintain a spray distance of 20-30 cm from the surface.
4. Apply 2 to 3 full coats of primer.
5. Allow 5 minutes evaporation time between coats.
6. After the last coat, you must allow the product to harden.
7. Finished spraying? Turn the can upside down and push the nozzle until only the propellant comes out. Now the nozzle is clean and you can store the remaining product.

Features of the MIPA Rapidfiller Spray grey filler primer

• Rust protection primer with corrosion protection
• Filler primer
• Fast drying
• Strong adhesion
• Easy to sand
• Can be overpainted with thinner or water-based paint
• Easy to apply
• Drying time of the MIPA Rapidfiller Spray grey filler primer
  • Dust free: 5 min at 20°C
  • Manageable and sandable: 30 minutes at 20°C