MIPA P67 S Carbon 2K Polyester Primer Filler + Hardener

2K Carbon Polyester Primer Filler

MIPA P67 S Carbon 2K Polyester Primer Filler + Hardener is a transparent spray filler. The filler is suitable prior to the application of carbon clear coat. The two-component filler has excellent filling properties and levels out unevennesses on synthetic fiber substrates (e.g. glass or carbon fiber reinforced composites).

MIPA Carbon Coating System

Carbon is extremely popular as a lightweight material and is used to reduce weight and fuel consumption in vehicles. To preserve carbon permanently, it is necessary to use the appropriate products for this purpose. Obviously, these coatings are needed to improve the low UV stability of carbon fibers. MIPA produces transparent coating products for carbon fiber surfaces. The MIPA Carbon Coating System consists of:

• MIPA 2K HS Carbonic Clear Coat
• Mipa P27 Crystal Carbon 2K Filler + Hardener
• Mipa P67 S Carbon 2K Polyester Primer Filler + Hardener

Paintable

Mipa P67 is directly paintable with MIPA 2K HS Carbon Clear Coat. Adhesion on carbon and other composite substrates, steel, galvanized sheets, aluminum and on wood.

Formula 1

Obviously, Formula 1 cars are not cheap. The cost of these vehicles often runs into the millions because the parts are made of carbon fiber. Carbon fiber is a very light and strong carbon fiber used mainly on sports cars and motorcycles.

Features MIPA P67 Spray Filler

• Supplied including hardener
• Excellent filling properties for porous and defective surfaces
• UV protection
• Transparent
• Evens out unevenness on synthetic fiber substrates (carbon, steel, galvanized sheets, aluminum, wood, etc.)
• Paintable with MIPA Carbon Coating System