MIPA Acrylfiller 2K rust resistant primer - 400ml aerosol

MIPA Acrylfiller 2K rust preventive primer in spray can

MIPA Acrylfiller is a 2K anti-rust primer suitable for priming iron, aluminium, zinc and steel surfaces. This acrylic primer dries quickly and has a high filling power. With this 2K anti-rust primer you can fill in irregularities such as scratches, cracks, dents and holes, making the surface smooth again. After drying, sand to obtain a smooth and even surface, then cover with 1K or 2K paint.

2K filler primer

This innovative 2K primer combines filler and rust inhibitor properties two-in-one, packaged in an easy-to-use spray can. The primer has a high filling power and offers excellent protection against rust and corrosion. The aerosol gives an attractive spray pattern and cures well, even if applied in several thick coats. As the 2-component primer is mixed with a hardener, it is resistant to fuels and mechanical stress.

How to apply MIPA 2K Acrylfiller Primer?

This 2K aerosol can contains an easy-to-apply 2-component filler and rustproofing primer. Study the step-by-step plan below to learn the best way to apply.

1. Make sure the spray can is at room temperature
2. Shake the can before use for several minutes
3. Remove the red button from the cap and place it straight down from the can onto the stem
4. Press the button firmly
5. Make sure the can is stable during this manoeuvre
6. Shake the can again for 2-3 minutes so that the 2 components are well mixed
7. Spray from a distance of 20-30cm from the surface
8. Apply the primer in 3 to 4 coats
9. Allow a 5 minute evaporation break between coats
10. Finished spraying for now? Turn the can upside down and press the nozzle until the suction tube is empty and only the propellant comes out
11. Use within 24 hours of activation

Features of the MIPA Acrylfiller 2K rust resistant primer

• Professional anti-rust primer
• Fast drying primer
• Filler primer
• Cures well, even if thick layers are applied
• Good resistance to chemical and mechanical stress
• Easy to sand
• Very strong adhesion
• Can be overcoated with 1K and 2K paint (water-based or solvent-based)
• Drying time:
  • Dust free after 1 hour at 20°C
  • Next coat after 3 hours at 20°C
  • Sandable after 3 hours at 20°C