HPX Protective Film BLACK 150mm - 5 meter

(2)

HPX Beschermfolie Auto ZWART 150mm - 5 meter
  1. Product information
  2. Specifications
  3. Product reviews
  4. Comparable products
Product information

HPX Protective Film BLACK 150mm

HPX Protective Film BLACK 150mm on 5 meter roll to protect your car from scratches, stone chips, signs of use and other damage. This matte black protective film is widely used on car bumpers, window pillars (B style), door frames, door sills and entry strips. The self-adhesive protective film black is easy to apply yourself is cut to size. In addition to protecting against outside influences, the HPX protective film black provides a beautiful matte black finish!

Make doorframe black

You can make door frames black with this matte black protection film. In addition to providing good paint protection, the HPX Black Protection Film can also be used to make door or window moldings black matte. Thanks to its high quality, the HPX Black Protection Film is easy to apply yourself!

Applying black paint protection film

Applying black paint protection film yourself? This HPX Black Protection Film is a protective film that you can apply yourself. In just a few simple steps you can apply the film.

  1. Before you begin, it is important to degrease the surface. Use a high-quality cleaner or degreaser.
  2. Spray a little water on the surface to make it easier to apply the film later.
  3. Remove the protective film from the adhesive layer and apply the film to the surface.
  4. Use a plastic spatula to push away air bubbles and moisture between the paint and film.
  5. Is the foil in the right place? If so, you can use a hair dryer for faster drying if desired.

Features HPX Protective Film BLACK

  • OEM quality protective film black
  • Can be used outside for a long time
  • Resistant to high pressure cleaning
  • Removable without damage
  • Adhesive: acrylic
  • Carrier: vinyl
  • Temperature resistance: 140°C
  • Adhesive strength: 15 N/25 mm
  • Thickness: 0.15 mm
Full product information

Specifications

SKU BP1505
Measurement 150mm x 5 meter
Brand HPX
Packaging per piece
EAN 5425014223798
All specifications

Product reviews

5/5

Based on 2 reviews

Write your review
Goed product
Tape purchased for motorcycle rider protection and masking scratches. Handles well, matte and even color.
Joost |
Translated from Dutch
Nut
To protect the sill and underside of doors, fenders, bumpers, all the underside of a 4x4/AWD during off-road/extreme outdoor use seems desirable, partly to prevent depreciation of the value of the vehicle in case of paint damage. An alternative is protective foil from https://www.xpel.nl/challenge-your-drive/stealth-satin/. Then an extra layer of Raptor STRONG PAINT FOR EASY TO MAINTAIN COATING is available, see https://www.raptorliner.eu/nl/raptor-liner. The idea is to apply it exactly over the foil for an offroad look but also to absorb splashing material. Stone chip damage can be reduced or prevented.

It is often the lower 15-30 cm of the bodywork. There are many foil companies that can do this for you, but a bit of a nit-picker can do it himself with good paint preparation and the right tools, so that it is applied properly, sticks, and remains effective. Perhaps supplier Raptor can advise on this. For the appearance: think about car lines/design. It has to fit. There are teee options: 1) you follow car/body lines. Points of reference are body shape, trim, headlight height, rear body parts, doors, windows or door locks/handles. 2) keep point 1 in mind for determining the height, but then aim for horizontal application of the top side of the film and let it run to the end of the bottom side of the body.
3) of course you can always protect a sill with (powder) coating by spraying. My question (without experience): how will the color difference turn out after removal of the film on trade-in? In any case, avoid that the raptor lacquer coating stays exactly on/inside the foil undercoat. Otherwise you will see a stripe on the paint which would be a shame and tedious to remove. The looks of your car will get an offroad boost with this. For commercial vehicles in construction it saves damage and looks more robust. Visser Design in Assen, foil specialist is recommended. Dd Focwa bodywork specialist can also perfectly apply the option coating later. Your car will increase in value when this super neat, (therefore) also removable when not wanted by the next owner, so never an objection because it has prevented damage!
Alexander |
Translated from Dutch
Comparable products