Hammerite Metal Paint Sprayer - High Gloss

(0)

  1. Complete Your Purchase
  2. Product information
  3. Specifications
  4. Product reviews
  5. Comparable products
Product information

Hammerite Metal Spray Paint

Hammerite Metal Paint Spray is a special metal paint for painting metal with a high gloss finish. You can spray this metal paint spray from Hammerite directly over rust where the metal paint acts directly as a rust stopper. Thanks to the special formula, you can spray the Hammerite paint on metal without primer or primer. The Hammerite metal paint spray is available in 5 colors of metal paint.

Colors metal paint spray

Hammerite metal paint spray is available in 5 colors with high gloss finish. Each color of Hammerite metal paint spray provides excellent adhesion and durable rust protection. The Hammerite colors of metal paint in spray can are:

  • Black
  • Green
  • Cream
  • Silver Grey
  • White

How to use metal paint spray?

Metal paint spray from Hammerite is an easy-to-use spray can to paint metal or lacquer iron. Thanks to the convenient spray, you don't need a paint roller or brush with the Hammerite metal paint spray. In addition, the metal paint spray gets to hard-to-reach places. Read the steps below on how to use the Hammerite metal paint spray.

  1. Remove loose paint and rust with sandpaper.
  2. Spray metal paint on bare metal? Then clean the surface with Hammerite Brush Cleaner & Thinner
  3. Want to spray Hammerite metal paint on a surface that is already painted or varnished? Then clean this first with Hammerite Metal Degreaser.
  4. Spraying non-ferrous metal? Treat it first with Hammerite Adhesion Primer.
  5. Spraying Hammerite metal paint over an existing paint? If so, do a test coat first before spraying. If after one hour the paint layer does not show any defects (such as crackle), you can use the Hammerite metal paint. Otherwise, first sand off all the paint.
  6. Tape the area well with masking paper and painter's tape.
  7. Shake spray can well at least 3 minutes before use.
  8. Apply at least 3 thin layers and spray in a smooth motion.
  9. Allow a pause of 15 minutes between coats.
  10. Keep a spraying distance of 30 cm.
  11. Tip: never hold the aerosol can still while spraying, this prevents sags.
  12. Note: the spray can should be at room temperature.

Characteristics

  • High quality metal paint
  • Metal paint spray with high gloss finish
  • Can be applied directly over rust
  • Bonds to all ferrous metals
  • Can be used without primer or undercoat
  • Stops rust
  • Fast drying lacquer
  • Gives lasting protection
  • Wear-resistant
  • Retains its color for a long time
  • Dust-dry after 10 minutes at 20°C
  • Yield: 3m² per 400ml spray can
Full product information

Specifications

SKU conf_hammerite-metaallak-spuitbus
Paint component 1K (1-component)
Brand Hammerite
Contents 400ml
Packaging each
All specifications

Product reviews

0/5

Based on 0 review

Write your review
Comparable products