Hammerite Heat Resistant Lacquer - Matt Gray

(0)

Choose your amount
  • 1x
  • 4x Save 2%
  • 8x Save 3%
  • 12x Save 5%
  1. Complete Your Purchase
  2. Product information
  3. Specifications
  4. Product reviews
  5. Comparable products
Product information

Hammerite Heat Resistant Paint Matt Gray

Hammerite heat resistant lacquer matte gray is a refractory paint gray in color that dries matte. The spray can Hammerite heat resistant lacquer gray matte is resistant to high temperatures up to 600 ° C. This heat resistant paint gray spray you can spray directly on metal without primer. This makes the Hammerite heat resistant paint spray ideal for spraying gray matte on an exhaust, brake caliper, BBQ, stove, heater or other surfaces that get hot and warm.

Heat resistant paint gray

Heat resistant paint gray is a paint that resists heat, high temperatures and fire up to 600 degrees Celsius. Hammerite heat resistant matte gray paint has high opacity, can be sprayed directly on metal without a primer and gives lasting protection after spraying. Thanks to the high quality lacquer, the matte gray heat resistant paint is fast drying and colorfast.

How to spray Hammerite heat resistant paint gray matte?

Hammerite heat resistant spray paint matte gray is easy to use without primer or primer. Use the step-by-step instructions below on how to spray Hammerite heat resistant paint matte gray.

  1. Make sure the metal is not warm or hot before you begin. The surface should be at room temperature.
  2. Remove paint and rust that is loose.
  3. Clean the surface with Hammerite metal degreaser.
  4. Lightly sand the surface and clean it again with degreaser.
  5. Tape off surrounding areas that do not need to be sprayed with masking paper and masking tape. Allow for overspray or spray mist.
  6. Shake spray can well at least 3 minutes before use.
  7. Apply 3 coats of heat resistant paint evenly until the paint is opaque.
  8. Keep a spraying distance of 25cm.
  9. Between spray coats, pause for 15 minutes.
  10. Finished spraying and is the heat resistant lacquer dry? Slowly heat the object from 120 to 600°C to allow the refractory paint to "bake.
  11. Tip: never hold the spray still while spraying, this prevents sags.
  12. Note: the spray can should be at room temperature.

Features Hammerite Heat Resistant Lacquer Matt Grey

  • Heat resistant lacquer up to 600 degrees Celsius
  • Refractory paint
  • Fast drying lacquer
  • Can be used without primer
  • Universal gray color
  • Matt finish
  • Dust-dry after 30 minutes
  • Yield: 0.5m² per 400ml aerosol can
Full product information

Specifications

SKU 5111739
Paint component 1K (1-component)
Brand Hammerite
Contents 400ml
Packaging each
All specifications

Product reviews

0/5

Based on 0 review

Write your review
Comparable products