FINIXA UV Drying lamp - UV-A LED technology

(0)

  1. Complete Your Purchase
  2. Product information
  3. Specifications
  4. Product reviews
  5. Comparable products
Product information

FINIXA UV Hand drying lamp

FINIXA UV Drying Lamp is a battery-powered hand lamp with UV-A LED technology. The FINIXA UV Drying Lamp is extremely fast drying UV automotive paint, clear coat, primer, filler, resin and glue. With this UltraViolet drying lamp you reduce the drying time and curing time significantly, allowing for faster repairs and damage repairs. FINIXA's UV-A hand lamp is battery operated and comes complete with charger, UV protection glasses, hanging bracket and case.

Professional UV drying lamp on battery

FINIXA UV drying lamp on battery is suitable for professional use to dry UltraViolet automotive paint, clear coat, primer, putty, primer, sealant and glue. The UltraViolet hand lamp has a strong Li-ion battery with a working time of 90 minutes. In just 3 hours the battery is fully charged again so the battery lasts another 90 minutes! Below is the technical information regarding the UV lamp:

  • Battery type: Li-ion 11.1 Volt
  • 5200 mAh
  • 57.72 Wh
  • Charging information: AC 100 - 230 Volt - 15V 1.5A

Ultra Violet hand lamp of the highest quality

The FINIXA hand lamp with Ultra Violet A LED technology is made of the highest quality materials. The UV-A drying lamp has an aluminum and polyamide housing making it not only lightweight, but also very strong and resistant to bumps or drops. Inside the housing of the hand lamp is a passive thermal cooling system reinforced with a fan for the best performance.

How to use FINIXA UV drying lamp?

  1. Wear UV protection glasses and remove them only after the work is finished.
  2. Hold the main switch for more than 1 second to turn on or off.
  3. Pull the light switch to turn the light on or off.
  4. Press the setting button to start the setting procedure. Turn on minute setting mode: the minute display will continue to flash.
  5. Press the duration setting buttons to adjust the - minutes (max. 10).
  6. Press the setting button again to enter the 'set seconds' mode. The seconds display continues to flash.
  7. Press the duration setting keys to adjust the - seconds (max. 60).
  8. Press and hold the duration setting keys to speed up the setting. The maximum time can be set to "10:00" minutes.
  9. Press and hold the setting button for 5 seconds without operating to confirm the setting procedure.
  10. The countdown starts after pressing the light switch to turn on the light.
  11. The countdown stops after pressing the light switch. It continues upon pressing the light switch again.
  12. If the lamp was turned off, the last countdown setting is remembered when the main switch is turned on again. The lamp automatically turns off when "00:00" appears on the remaining time on the display. The lamp automatically turns off after 60 minutes if no keys are operated.

Features FINIXA UVL00 UV-A Drying Lamp

  • Extremely fast curing time
  • Significantly reduces UV curing time
  • Powerful radiation with maximum UV-A intensity of 55 μW/cm2 at 20cm
  • Successfully tested on UV automotive paints and paint products
  • Produces only UV-A (no UV-B or UV-C)
  • Built-in cooling system with fan keeps lamp cooler to maintain optimum light output during extended use
  • Ultrasonic distance meter
  • LCD display
  • Wall-mountable charging station for easy hanging and charging at the same time
Full product information

Specifications

SKU UVL00
Brand FINIXA
Packaging each
EAN 5491196016282
Category Lighting

Product reviews

0/5

Based on 0 review

Write your review
Comparable products