Filler Primer SprayMax aerosol

Filler Primer SprayMax aerosol

Filler Primer SprayMax aerosol is a professional primer with high filling power. SprayMax Primer Filler spray provides great adhesion of car paint and can also be used as wash primer. This high build filler primer is available in 6 colors.

High Build primer filler

SprayMax High Build primer filler is more than a adhesion promoter with good filling power. This SprayMax primer can also be used as wash primer, filler and filler primer. How this works is shown below.

• Washprimer: Spray this primer in 1 layer with a layer thickness of 15µm.
• Primer: Spray this primer in 1 to 2 layers with a layer thickness between 15 and 30µm.
• Filler primer: Do you want this primer to fill the unevennesses well? Then spray 2 to 3 coats with a layer thickness of 30 to 50µm.

Primer with a nice spray pattern

sprayMax's 1-component Filler Primer is equipped with a spray cap that provides a particularly nice spray pattern with a high paint output. This saves you time, but the drying of the paint is also considerably faster. As a result, this SprayMax spray can primer is also excellent for wet and dry sanding.

The SprayMax 1K Filler primer in aerosol is available in 6 colors

• Light Grey
• Medium Grey
• Dark Grey
• Beige
• White
• Black

Features of SprayMax 1K Filler Primer

• Can be used on all metal surfaces.
• Excellent adhesion and high corrosion protection
• Good insulation of scuffed areas and under water-based paints
• High filling power
• Can be used as 1K epoxy primer, Spot Repair insulator, Washprimer, Aluminum & Non Ferrous Primer and universal bonding primer.
• Fast application and material saving
• Even filling and flow
• Wet on wet application
• Weld-through
• Recoatable with all professional primers and topcoats such as 2K color paints and both 1K color solvent-based and water-based paints.
• Easy to use and good sandability
• Fast drying and suitable for IR drying
• Can also be used as wet-on-wet filler
• Consumption: approx. 0.5m ² - 1m ² per spray can depending on layer thickness and substrate.

How do I spray this SprayMax primer?

We recommend first de-rusting and thoroughly cleaning the damaged area with SprayMax silicone remover. This will ensure that the surface is clean, grease and dust free. Then shake the spray can thoroughly for 2 minutes and spray a test piece first before using the product.

Keep the following rules of thumb while spraying SprayMax 1K primer.

• Spraying distance: 10-15 cm.
• Number of cross coats: 1 to 3
• Evaporation time between coats: 3-5 minutes

How fast does this 1K filler primer in spray can dry?

SprayMax 1K Filler Primer is a fast drying primer in aerosol can. How fast it dries is shown below.

• Dust dry: 10-12 minutes at 20°C
• Can be handled: about 15 minutes at 20°C
• Sandable: 25 minutes at 20°C
• Infra Red Short Wave: 7 minutes

Notes:

• Wear personal protective equipment (respiratory protection Type: A2/P2, safety gloves e.g. latex or nitrile)
• After spraying, we recommend that you turn the spray can upside down and empty the built-in suction tube.