EVERCOAT Rage Gold Putty with Hardener - 3 liters

EVERCOAT Rage Gold Putty with Hardener

EVERCOAT Rage Gold Putty is a highly advanced filler that levels itself when applied. Its creamy formula makes it very easy to mix and applicable to all metal surfaces. Contains Hattonite, a unique ingredient that reduces heat and friction caused by aggressive sanding.

Putty for aluminum

Putty for aluminum is used for filling holes, cracks and dents. This metal putty is a special aluminum putty that adheres strongly to the surface. Because the metal putty aluminum is dark in color, you are able to make a high-quality repair.

Universal putty

All Evercoat putties adhere to any surface, including aluminum and galvanized. They have a higher resin content than traditional European fillers, making them less porous. This reduces moisture penetration and primer absorption. The putty has an excellent application time and also dries faster.

Features EVERCOAT Rage Gold Putty with Hardener

• Highly advanced filler
• Creamy formula
• Easy to mix
• Suitable on all metal surfaces
• Reduces heat and friction
• No holes

Mixing ratio 2K putty

The universal 2K putty mixing ratio is 2 to 3%. Add between 2 and 3% hardener to the putty and mix the two components well while making the putty. Use a mixing pad with a spatula or putty knife to do this. Too much hardener can lead to too rapid curing and can also cause the putty to detach or mark through the paint. Therefore, always mix the putty with hardener carefully and avoid drawing in air while mixing.