CROP 2K Polyester Putty 125ml + Hardener

CROP Polyester Putty 125ml

CROP Polyester Putty 125ml is a small jar of professional 2K putty made of polyester resin. This 2 component polyester putty is soft and creamy making it very easy to apply the putty. Besides filling and leveling, this is directly a finishing putty that dries tight. After the CROP polyester putty cures, you can sand it down incredibly easily. The mini 125ml jar of polyester putty makes it ideal for small jobs!

Finishing putty without pinholes

Poly putty from CROP is a high-quality finishing putty that will cure without pinholes and pores. This self-leveling putty has high spreadability and strong adhesion to the surface. You can use this 2K putty to fill, level and finish. Thanks to its universal application, you can use the 2K polyester putty on:

• Plastic and plastics
• Metal, iron and galvanized steel
• Aluminum
• Carbon and fiberglass
• Existing lacquer or paint
• On already applied filler

Car putty

Car putty is easily applied with a spatula or rubber. This polyester putty from CROP is such a special putty for the car. Because the 2K putty is polyester-based, it has a creamy and soft structure that adheres different materials. Whether you want to use the putty for car on plastic, metal or aluminum; it's all possible! With this you will fill dents, cracks and holes in any car part and body panel.

Sanding polyester putty? You need this grit!

Sanding polyester putty is done once it is fully cured. For sanding polyester-based putty, we recommend grit P80 to start with. Then continue sanding in steps to P120 and P180 for a nice clean sanded fiberglass putty. After the putty is dry you can apply your desired primer that serves as a primer for your paint.

Features CROP 2K Polyester Putty 125ml

• Professional polyester putty
• 125ml jar of putty is ideal for small jobs
• Polyester putty that is very soft and creamy
• Remains flexible so the putty does not break or tear
• Putty is easy to sand (P80 to P180)
• This putty is air-drying at room temperature

Mixing ratio polyester 2K putty

The polyester 2K putty mixing ratio is 2 to 3%. Add between 2 and 3% hardener to the putty and mix the two components well while making the putty. Use a mixing pad with a spatula or putty knife to do this. Too much hardener can lead to too rapid curing and can also cause the putty to detach or mark through the paint. Therefore, always mix the putty with hardener carefully and avoid drawing in air while mixing.