CROP 1K Epoxy Primer

9 reviews

CROP 1K Epoxy Primer
Choose your amount
  • 1x €10.88
  • 6x €10.66 €63.96 Save 2%
  • 12x €10.44 €125.28 Save 4%
  • 18x €10.33 €185.94 Save 5%
  • 24x €10.01 €240.24 Save 8%
  1. Complete Your Purchase
  2. Product information
  3. Pros and cons
  4. Specifications
  5. Frequently asked questions
  6. Product reviews
  7. Comparable products
Product information

CROP 1K Epoxy Primer

CROP 1K Epoxy Primer is a high-quality, one-component corrosion resistant sealer with excellent adhesion to metal, fibreglass and aluminum surfaces. 1K Epoxy primer spray paint improves adhesion of body fillers and resists moisture damage caused by water permeation. It is recoatable with all standard solvent or waterborne 1K and 2K paints.

Fast-drying primer

This fast-drying primer has a drying time of 5 to 10 minutes at 20 degrees Celsius. After just 30 minutes you can already sand the epoxy primer to a smooth surface. Recommended for repaired parts and spot repairs, but also for insulating sanded-through areas.

Epoxy primer car

An epoxy primer on your car protects the bodywork against rust and corrosion. Ideal for all metal surfaces, e.g. steel, stainless steel, aluminium, anodised aluminium, brass, sanded factory coats and old paint layers, various plastics, glass fibre-reinforced synthetic material.

How do I spray epoxy primer?

Learning how to spray CROP epoxy primer is very easy! Please follow the instructions below.

  1. Make sure the surface is clean and oil-free. Use CROP Silicone Remover.
  2. Sand the surface for a better adhesion. Use grit P400 and P500.
  3. Repeat step 1.
  4. Shake spray can well.
  5. Spray 1 to 3 layers epoxy primer with a spray distance of 20 to 30cm. Apply a flash off time between coats of 3 to 5 minutes.
  6. After the final coat, let primer dry for about 30 minutes at 20°C. Afterwards, the primer is recoatable with 1K or 2K paint.
  7. Would you like to use the 1 component epoxy primer again next time? Turn the spray upside down and spray the nozzle empty until nothing comes out. Store it in a dark room.

Features CROP 1K Epoxy Primer

  • Professional epoxy primer
  • Rust and corrosion resistant
  • Filling primer
  • Fast-drying
  • Easy to sand
  • Less overspray
  • Recoatable with 1K and 2K paint
  • Drying time:
    • Dust dry after 5 to 10 minutes at 20°C
    • Recoatable after 10 minutes at 20°C
Full product information

Pros and cons

  • Anti-corrosion protection
  • Fast drying time
  • Recoatable with any paint
  • Easy to sand
  • Only available in grey

Specifications

SKU 2767-0003
Paint component 1K (1-component)
Brand CROP
Contents 400ml
Packaging per piece
All specifications

Frequently Asked Questions

Product reviews

5/5

Based on 9 reviews

Write your review
First!
Excellent primer. Always used to use 2k in a spray gun before, but given the price of these spray cans, that is a thing of the past. Tight result, ultra short drying time and pretty good filling properties. Really well satisfied!
Dennis Boxem |
Translated from Dutch
very good stuff
top
Marco Leerssen |
Translated from Dutch
Fast, beautiful result
Just degrease and spray. Nice even surface and good adhesion with the top coat. Just a good product.
Nanne |
Translated from Dutch
Comparable products