Colormatic 1K Plastic Adhesion Primer in Aerosol

Colormatic 1K Plastic Adhesion Primer in Aerosol

ColorMatic plastic adhesive is applied directly as a primer and sticks very well on all plastic interior and exterior car parts, including bumpers, mirrors and tuning parts. It can be painted over after drying for about 10 minutes with, for example, ColorMatic 1K primer filler, plastic paint or pre-fill base coat.

Available in 2 sizes

The Colormatic 1K Plastic Adhesion Primer is available in a small aerosol of 150ml for when you only need to spray only a small part and also in a 400ml spray can for large surfaces.

Features:

• Bring to a very thin layer
• Good adhesion properties
• Very fast drying
• After 10 minutes paintable
• Highly elastic
• Colour: Colourless, mixed with silver pigments

Pre-treatment:

• Clean the spraying part thoroughly with Colormatic 1K Silicone Remover allowing the parts to be treated are free of grease and dust and, if necessary, sand lightly.
• Shake the can well for 2 minutes.
• First spray a test piece.

Features:

• Excellent adhesion to all plastic parts
• High elasticity
• Very fast drying
• Easy to use, thereby saving time
• Sprayable with all professional primers and topcoats as 2K colour paints and 1K lacquers both solvent-based and water-based lacquers.
• Consumption: approximately 6m ² - 8m ² per can, depending on film thickness and substrate.

Application:

• Spray distance: about 25 cm.
• Number of thin layers: 1 (1-2 uM)

Drying times:

• Dust dry: 10 minutes / 20 ° C
• Recoat: 10 minutes / 20 ° C

Notes:

• Wear personal protective equipment (respirator type: A2/P2 gloves such as latex or nitrile)
• After spraying, we recommend turning the aerosol upside down and spray the built-in suction empty.