COLORMATIC 1K Filler Primer in Aerosol

Professional 1K filling primer in spray can

COLORMATIC 1K Primer Filler is a professional, quick drying and universal 1-component primer of MoTip Dupli-Color with excellent adhesion, filling strength and corrosion protection for all metal substrates. Can be sprayed with all common water-based and synthetic base coat and 1K and 2K topcoat systems. Depending on the layer thickness as well as primer and filler to use. Also ideal for spot repairs.

More than a filler primer

COLORMATIC 1K Primer / Filler is more than a 1-component primer with a good filling. This primer can also be used as wash primer, filler and filler primer. How this works is shown below.

• Wash primer: Spray this primer in 1 layer with a layer thickness of 15 μm.
• Primer: Spray this primer in 1 to 2 layers with a layer thickness between 15 and 30 μm.
• Filling primer:Do you want this primer to fill the imperfections? Then spray 2 to 3 layers with a layer thickness of 30 to 50 μm.

The CMP 1K Primer Filler is available in 8 colors

CMP 1K filler primer is available in 8 different colors. ColorMatic fill primers HG1 to HG8 offer optimal synergy effects in modern automotive paints for time and material savings. HG1 (white) is also suitable as a control layer when using dark fillers / primers.

The 8 different shades of the 1K fillerprimer range are optimally adjusted to the respective shade or brightness level of the substrate. This ensures better coverage and color accuracy with lower material consumption. An essential advantage if you want to achieve the best results.

• White (HG1)
• Light Gray (HG2)
• Gray (HG3)
• Tele Gray (HG4)
• Basalt Gray (HG5)
• Graphite Gray (HG6)
• Black (HG7)
• Red (HG8)

Features of the CMP 1K Fill Primer

• Can be used on all metal surfaces.
• Excellent adhesion and high corrosion protection
• Good insulation of run-through areas and water-based paints
• High filling force
• Can be used as Spot Repair isolator, Washprimer, Aluminum & amp; Non Ferro Primer and universal adhesive primer.
• Fast processing and material saving
• Even filling and flow
• Wet in Wet
• Paintable with all professional primers and topcoats such as 2K color lacquers and both 1K solvent-based paints and water-based paints.
• Easy to use and easy to sand
• Quick drying and suitable for IR drying
• Can also be used as a wet-in-wet filler

How do I spray these 1-component primer from Colormatic?

We recommend that you first de-stain the damaged area and clean thoroughly with a silicone remover. This ensures that the surface is clean, free of grease and dust. Then shake the aerosol can well for 2 minutes and first spray a test piece before using the product.

• Remove rust, sand the surface and clean with a silicone remover.
• Shake the aerosol for at least 2 minutes, counting from the audible part of the balls.
  
• Spray a test piece and check the color.
  
• Apply several thin layers at a distance of 15 to 20 cm.
• Nat-in-wet sprayable after 12 to 15 minutes (20 degrees)
• Sandable after 30 minutes (at 20 ° C) or after 8 to 10 minutes at IR drying
• After use, replace canister and spray valve.
• Notes:
• Wear personal protective equipment (respiratory protection Type: A2 / P2, protective gloves such as latex or nitrile)
• After spraying, we advise you to turn the aerosol can on its head and empty the built-in suction tube.