COLAD Easy2Check Control spray 400ml

COLAD Easy2Check Control spray

COLAD Easy2Check Control spray is the most efficient and effective product to check for irregularities during the sanding of panels and / or checking the correct colour on your spray samples. It is used to make a temporary gloss layer on both spray samples (for colour control) as well as car panels (for the control of deviations in the surface).

COLAD Easy2Check is odourless and evaporates completely after use without leaving leftovers (evaporates completely after 15-20 minutes). This makes COLAD Easy2Check using an expensive transparent topcoat unnecessary. By blowing air over the surface of the evaporation time is shortened. The COLAD Easy2Check can be used outside the spray booth / mixing room.

Colour control:

• Spray the product on a spray example, over the lacquer to create a gloss and make sure the colour matches 

Panel control:.

• Spray the entire panel after the sanding process. The shiny surface helps you easily discover imperfections.

Instructions for use

Color check

• Spray a thin layer of Easy2Check® on a spray sample with the relevant paint to create a temporary sheen.
• Hold the sample against the object to check the color.
• We recommend also applying Easy2Check® to the object to get the most accurate check.
• Repeat this process until you find the correct color.

Sanding/Panel Checking

• To check the finish of a repaired panel after sanding, apply Colad Easy2Check® to the surface to create a temporary gloss layer. In this way, abnormalities in the panel become more clearly visible.

Notes

• Speed up the evaporation process by blowing air over the surface
• Can be used outside the spray booth/mixing room
• Safe to use on putty

Attention

• UV-Blockers in a transparent lacquer may have a different effect on certain colors compared to Easy2Check®.
• We recommend using a transparent lacquer on the final color sample for a final check.