Almost done!
Close
Anti stone chip coating
Anti stone chip coating for car
Anti stone chip coating protects the car from stone chips. An anti stone chip coating is bitumen based which is why it is also called a bitumen coating. A bitumen anti-chip coating is applied to the underside of the car, in wheel wells, sills, hollow spaces in the bodywork and other visible parts on the car. Anti-scratch coatings can be purchased in spray can and undercoating bottle.
Anti stone chip spray
Anti stone chip spray is a spray can with a bitumen coating to protect the car from stone chip damage. Anti-chip spray is easy to use because the spray can reaches everywhere without the need for a special spray gun. The bitumen anti-chip spray can also gets into hard-to-reach areas and tight spaces such as wheel wells, sills and socket beams. At CROP you can buy anti-scratch spray in black, gray and white from well-known brands such as 3M, MoTip and Tectyl.
MoTip anti stone chip spray
MoTip anti stone chip spray is a bitumen coating in spray or underbody can to provide the car with an anti stone chip protection layer. MoTip anti-chip is a professional bitumen undercoating that protects the underside of the car, wheel wells and wheel arches against stone chip damage. The MoTip anti stone chips is available in the colors black, grey and white. After curing, this bitumen anti stone chip coating is repaintable!
How to spray bitumen stone chip coating?
Bitumen anti stone chip coating spraying can be done by anyone, you just need to know the best way to spray the anti-scratch coating. Follow the step-by-step plan below to properly spray the anti-scratch coating.
- Read at all times the instructions on the spray or canister.
- Remove loose paint or varnish and rust spots.
- Clean the surface with a good degreaser so that the surface is clean, dry and grease-free.
- Make sure the anti-scratch spray is at room temperature
- Make sure the temperature during spraying is between 15 and 25.
- Shake the spray can well for 5 minutes before use.
- Always spray a test piece first.
- Maintain a spraying distance of 25cm to 30cm.
- Apply the anti-scratch coating in several layers.
- Let the coating dry in a room that is free of dust.
- Finished spraying? Clean the vential of the spray can by holding the spray upside down and holding the spray head depressed for 5 seconds.
- Please note, the drying time of the anti-chip coating depends on temperature, humidity and layer thickness!
Want to buy Anti-chip coating?
Do you want to buy anti-chip coating to protect your car from stone chip damage? At CROP you have a wide choice of various professional quality anti stone chip spray from brands such as MoTip, 3M and Tectyl. Do you prefer to spray the stone chip coating with a spray gun? That's also possible with our anti stone chip bitumen coatings in underbody can! Order your anti-chip coating before 10 p.m. and receive it the next day.