Bison Tix 250ml

Bison Tix

Bison Tix is the best contact adhesive based on polychloroprene rubber for repairs that need to be fixed immediately. The contact adhesive is universally applicable and extremely suitable for materials under tension.

Strength contact adhesive

Bison Tix adhesive is suitable for bonding flat joints or laminating many materials. Think of:

• plastic sheeting (such as Formica)
• veneer
• board
• plastic edges
• rubber
• leather
• linoleum
• cork
• textile
• polyether foam
• stair edges
• floor covering on stairs
• pads or felts under furniture
• shoes
• bags
• toys
• carpet
• hobby crafts

How do I use Bison's contact adhesive?

Tix adhesive should be applied at room temperature (do not process below +10°C). The final strength of bisontix gel depends on the pressure applied. Therefore, press as well as possible over the entire surface.

1. The surface must be dry, dust- and grease-free.
2. Ensure that the relative humidity is below 65% to prevent blistering.
3. Always test on an inconspicuous part of the surface first.
4. Clean and degrease the surface.
5. Apply contact adhesive wood thinly and evenly to both surfaces with a brush.
6. Allow both parts to dry for 10 to 25 minutes.
7. Once the contact adhesive no longer pulls threads merge materials.
8. After fastening, correction is no longer possible.
9. Pat, roll or press the materials firmly together.
10. Store cool, frost-free and tightly closed.

Technical specifications

• Basic material: Polychloroprene rubber
• Color: Yellow
• Density approx.: 0.9 g/cm³
• Flexible: Yes
• Hand-holding time: Immediate
• Minimum temperature resistance: -15 °C
• Maximum temperature resistance: 70 °C
• Humidity resistance: Good
• Solid content approx.: 20
• Solvent: Mixture
• Viscosity: Gel

Characteristics BisonTix

• Super strong
• Suitable for materials under tension
• Universally applicable
• Instantly bonds
• Gel
• Moisture and frost resistant
• Easily spreadable
• Does not pull threads
• Does not drip
• Temperature resistant from -15°C to +70°C