Bison Spray Adhesive 200ml

Bison Spray Adhesive

Bison Spray Adhesive is suitable for gluing paper, cardboard, photos, posters, reproductions, collages, metal foils and stencils. For temporary and permanent fixing of different materials.

What can I use the glue spray for?

Adhesive spray from Bison can be used for bonding insulation and decorative materials, such as: polyether foam/foam rubber (sound insulation, cushions in furniture), felt, textiles, leather, cork, Styrofoam (tempex), among themselves and on wood, board, chipboard, glass, concrete and metals.

How do I use bison spray adhesive?

1. Shake well before use.
2. Make sure the distance between the spray head and the material to be glued is 20-25 cm.
3. Spray the glue finely and constantly.
4. Permanent: apply a thin, even layer to both surfaces. Wait at least 10 min. and then press the parts firmly together. Fixed immediately, correction is no longer possible! The greater the pressure, the better the bonding result. The duration of the pressure is not essential for the strength of the bond.
5. Temporary: Apply a thin, even layer to the part that is to remain removable and wait at least 20 minutes. Then the part is self-adhesive and can be attached and removed several times.
6. After spraying, hold the can upside down and press the spray can until only propellant and no glue comes out. This prevents clogging of the spray can.

Features Bison Spray Adhesive

• Fast drying glue
• Powerful bonding
• Aromatics-free
• Universally applicable
• Liquid spray adhesive
• Moisture-resistant
• For temporary and permanent fixing
• Fast and strong