Bison Poly Max High Tack Express 440 gram - White

Bison Polymax High Tack Express

Bison Poly Max High Tack Express is a universal assembly adhesive and sealant with high initial adhesion a fast final strength build-up. Montagekit polymax is also suitable for sealing cracks in walls and ceilings.

The best assembly sealant

Bison sealant polymax is suitable for gluing, mounting and sealing different surfaces.

• Bonding: glass, stone, natural stone, concrete, plaster, many plastics, wood, chipboard, Trespa, iron, aluminum, zinc, steel, mirrors, stainless steel, etc.
• Fitting: wainscoting, battens, skirting boards, window sills, thresholds, fascias, sheet metal, drywall, mouldings etc.
• Sealing: window frames, stair treads, window sills, thresholds and drywall

How do I use Bison Polymax adhesive?

Use only at temperatures between +5°C and +40°C

1. The surface must be clean, dust-free and dry for maximum adhesion.
2. Glue and mount: Apply sealant in stripes or dots (every 10-40 cm) plus always at corner points and along edges of sheet material.
3. Position material within 10 minutes and press firmly or tap lightly with a rubber mallet.
4. If necessary, clamp or fix heavy materials for 4 hours.
5. Hand-tight after 30 minutes, the joint is now sufficiently strong for transport or light loading.
6. Maximum final strength after approx. 4 hours, depending on substrate (at least 1 porous material) and ambient conditions.
7. Sealing: Apply sealant evenly to the bottom of the joint and smooth within 10 minutes with a moist (soapy water without lemon) putty knife, sealant spreader or finger.
8. Smooth vertical joints from bottom to top.
9. Complete curing after a few days (depending on layer thickness).
10. When repainting with alkyd paints, the paint may dry more slowly.
11. Use white spirit to remove wet glue residues.

Features Bison Polymax High Tack Express

• Very high initial tack
• Super fast end strength build up
• Very high final strength
• Permanently elastic
• Indoor and outdoor use
• Paintable (test beforehand)
• Good filling capacity
• Temperature resistant from -40°C to +100°C
• UV, water and weather resistant 100% adhesive (non-shrink)
• Adheres to slightly damp substrates
• Solvent-free
• Excellent adhesion without primer
• Acid-free, odourless