Bison Mounting Kit Original 125gram

Bison Mounting Kit Original

Bison Montagekit Original is an extra strong and filling assembly adhesive based on neoprene rubber. The assembly adhesive ensures the fixing of materials under tension and is permanently elastic.

Strong assembly adhesive

The waterproof assembly adhesive is permanently elastic, filling and ideal for indoor and outdoor use. Suitable for fixing a.o:

• wood
• plastic
• metal
• stone
• gypsum
• tiles

How do I use assembly adhesive Bison?

Bison's best assembly adhesive is easy to use. Process only at temperatures between +5°C and +40°C.

1. Make sure the surface is firm, dry, clean, dust- and grease-free.
2. Apply adhesive evenly in dots or streaks every 20 to 30 cm, depending on the weight of the material.
3. Always apply adhesive at corners and along edges.
4. Assemble materials immediately with a sliding movement and press or tap firmly. Correcting is still possible.
5. With heavy materials, materials under tension or with two non-porous materials, apply the "Fixed-Loose-Fixed" method.
6. Mount material, press and immediately release.
7. allow to dry for 5 minutes, assemble in the same place and press or tap firmly. Correcting is not possible.
8. For heavy materials, fix or support if necessary.

Technical specifications

• Basic material: Neoprene rubber
• Chemical resistance: Good
• Color: Beige
• Density: 1.25 g/cm³
• Filling capacity: Good
• Final strength after: 48 hours
• Hand-fast tuhd: Adheres immediately with firm-loose-fast method
• Paintability: Very good
• Shear strength: 600 N/cm²
• Solids content: 65
• UV resistance: Very good
• Water resistance: Good

Characteristics Bison Mounting Kit Original

• Very high final strength
• Applicable inside and outside
• Filling
• Suitable for materials under tension
• Suitable for non-porous materials on top of each other
• Permanently elastic
• Universally applicable
• Suitable for uneven substrates
• Can be corrected in a short time
• Water-resistant
• Temperature resistant