Bison Kombi Turbo 24ml - 2K Epoxy Adhesive

Bison Kombi Turbo

Bison Kombi Turbo is a superfast, transparent 2K epoxy adhesive for repairs to pottery, porcelain, glass, leather, wood, stone, metal and ceramics. The 2K epoxy adhesive is universally applicable.

2K adhesive

Kombi turbo bison is a professional 2-component adhesive suitable for many materials. The 2K adhesive is ideal for fast, strong and invisible repair of materials.

How do I use Bison epoxy adhesives?

Bison's iron-strength epoxy adhesive is suitable for repairs to various materials. Process only at temperatures between +5°C and +25°C. 2K epoxy cures by mixing the resin and hardener. Use the steps below.

1. Wear nitrile gloves.
2. Remove the spatula from the side of the double syringe and the sealing cap from the handle.
3. Break the seal.
4. Press an equal amount of both components out onto the mixing tray.
5. Mix both parts well together with the spatula until a mixture is formed with a homogeneous color.
6. The epoxy adhesive remains workable for about 90 seconds at a room temperature of +20 degrees.
7. Apply thinly to both parts and materials together, then hold in place for at least 10 minutes.
8. Be careful not to move the bonded parts before the adhesive has cured.
9. The joint is hand-tight after approx. 10 minutes. Complete curing after approx. 1-2 hours (at 20°C).
10. After use, clean the nozzle well with a cloth and place the special cap from the handle on the double syringe.
11. Close tightly, resin and hardener must not come into contact with each other.

Features Bison Kombi Turbo Two-component Epoxy Adhesive

• Super fast
• Very strong
• Universal
• Filling
• Temperature resistant from - 20°C to + 65°C
• (Water and seawater resistant
• Chemical resistant
• Paintable after curing
• Applicable inside and outside
• Transparent