Bison Hard PVC Glue Gel 250 ml bottle + applicator

(0)

  1. Complete Your Purchase
  2. Product information
  3. Pros and cons
  4. Specifications
  5. Frequently asked questions
  6. Product reviews
  7. Comparable products
Product information

Bison Hard PVC Adhesive Gel

Bison Hard PVC Adhesive Gel is suitable for bonding sleeves, fittings, pipes with narrow and wide fit in pressure and drainage systems. The special brush ensures fast and easy application of glue PVC.

How do I use Bison PVC adhesive?

Bonding pipes, sleeves and fittings is very easy. Follow the steps below.

  1. Do not apply at temperatures ≤ +5°C.
  2. Cut pipes squarely, chamfer and deburr.
  3. Clean the adhesive surface with acetone and a dry microfiber cloth.
  4. Apply the PVC adhesive quickly and evenly lengthwise to both bonding surfaces (pipe thick, socket thin).
  5. Assemble the joint immediately.
  6. Remove excess adhesive residue and do not mechanically stress the joint for the first 10 minutes.
  7. Close packaging tightly after use.

Technical specifications PVC adhesive

  • Basic raw material: PVC solution in a solvent mixture
  • Chemical resistance: Depending on gap width, drying time, pressure, temperature, type and concentration of carrier. In general, the adhesive compound has the same chemical resistance as the material itself. Exceptions are very aggressive chemicals.
  • Density approx.: 0.89 g/cm³
  • Flash point: K1 (<21°C)
  • Solids content approx: 21
  • Viscosity: Tixotropic
  • Viscosity Approx.: 1200 mPa-s

Characteristics Bison Hard PVC Adhesive Gel

  • Gel
  • Fast
  • THF-free
  • Colorless
  • Does not drip
  • Tixotropic gap filling
Full product information

Pros and cons

  • Does not drip
  • THF-free
  • Fast
  • First 10 minutes not loadable

Specifications

SKU 1313030
Brand Bison
Contents 250ml
EAN 8710439027258
Category Adhesives, Seam Sealers & Resins

Frequently Asked Questions

Product reviews

0/5

Based on 0 review

Write your review
Comparable products