Anti Corrosion Primer SprayMax aerosol

Anti Corrosion Primer SprayMax aerosol

Anti Corrosion Primer SprayMax aerosol is a universal primer with rust inhibiting properties. This SprayMax Anti Rust Primer aerosol provides the surface with great protection against the formation of corrosion and rust. The SprayMax Brown Adhesion Primer features a superb spray pattern with high paint output in just a short time. Thanks to its fast drying, the primer is excellent for wet and dry sanding.

Filling Primer in spray can

The SprayMax Adhesion Primer in aerosol can is specially developed for filling all metal surfaces and old paint coats. Depending on the layer thickness, it can be used as a primer or filler. This makes this spray can 1K primer ideal for both small and large damage repairs, scuffed areas and spot repair work on old paint coats, steel, galvanized steel, polished aluminum, chrome, fiberglass and various plastics.

Features of SprayMax Anti Corrosion Primer

• Excellent protection against rust
• Very good adhesion
• Excellent heat resistant up to +/- 500° C
• Can also be used as welding primer
• Weldable and welding resistant (welding drops are "repelled")
• Can also be used on old coatings
• Excellent filling properties
• Good spraying properties
• Easy to use and easy to sand
• Chromate free
• Fast drying and suitable for IR drying
• Consumption: approx. 0.5m ² - 1m ² per spray can depending on layer thickness and substrate.
• Overpaintable with all professional primers and solvent-based topcoats (except water-based paints).
• At a minimum dry film thickness of 50 μm, this red/brown SPRAYMAX 1K Adhesion Primer does not have to be covered for 3 months.

Preliminary treatment

• Derust the damaged area and clean thoroughly with SPRAYMAX 1K Aqua Silicone Remover so that the parts to be treated are free from grease and dust.
• Shake the can well for 2 minutes.
• Spray a test piece first.

How do I spray this Anti Corrosion Primer?

• Spraying distance: approx. 25 cm.
• Welding primer: 1 layer (6-10 μm)
• Adhesive primer: 1-2 layers (15-30 μm)
• Filling primer: 2-3 layers (30-50 μm)
• Evaporation time between coats: 1-5 minutes

Drying times SprayMax Anti Corrosion Primer

• Welding primer and adhesion primer: 10-15 minutes at 20°C
• Filler primer: 15-60 minutes at 20°C
• Short wave Infrared drying is possible: 7 minutes