AEROSOLV Standard Aerosol Can Disposal System 28202

Eliminate and reduce your hazardous waste by safely depressurizing your aerosol cans

AEROSOLV Standard System is a simple and handy device for emptying used spray cans safely, clean and quickly. As a result, it is no longer necessary to dispose of it as hazardous waste, but to sell it as scrap.

The Aerosolv punctures a small hole into the top of an aerosol can, collects the fluid residue and safely vents the vapors through a two-stage filter. Angled pin ensures a clean puncture every time; punctured cans have no sharp, jagged edges or crushed metal. Unit mounts on either a 30- or 55-gallon drum with standard 2” and ¾” bung opening – released liquids are captured in drum. System works with domed mini, standard and jumbo aerosol cans

The Aerosolv Advantage

Aerosolv eliminates a hazardous waste stream and greatly benefits the environment by converting an aerosol can into a recyclable steel container.

A wide variety of major industries utilize aerosol cans, spanning industrial manufacturing, municipalities and vocational education, among others. What happens to an aerosol can after it has reached its useful life? Proper disposal guidelines dictate that pressurized aerosol cans are typically sealed in a drum to be processed as hazardous waste at a landfill or facility. The cans are considered to be hazardous because they contain a liquid hazardous waste or are still pressurized, which may cause them to potentially explode at the landfills. Companies that do not dispose of aerosol cans properly risk paying hefty fines.

However, this does not have to be the case. Aerosolv® offers the only technology of its type to be tested and verified by the joint US EPA and California EPA Environmental Technology Verification Program. Aerosolv® safely depressurizes the aerosol can, collects all residual liquid, and filters VOCs. Punctured and drained aerosol cans meet Resource Conservation and Recovery Act (RCRA) regulations of scrap metal, which allows them to be recycled or safely disposed.

Using the Aerosolv System

Using an Aerosolv Recycling System couldn’t be easier. Simply place the can into the cast aluminum body, lock lid to secure the can in place, and push down on the handle. The durable, non-sparking piercing pin punctures the can, allowing the residual liquids to flow directly into the collection drum. The two-piece coalescing filter/carbon cartridge, which threads directly to the ¾" bung of the drum, then captures odors and potentially harmful VOCs.

This Aerosol Can Disposal System is the most cost effective system on the market!

Puncture your Aerosol Cans legally and safely with Aerosolv!

• Eliminate an entire waste stream and reduce disposal costs by puncturing and recycling your aerosol cans
• Angled pin ensures a clean puncture every time; punctured cans have no sharp, jagged edges or crushed metal
• Two-piece coalescing filter/carbon cartridge captures odors and potentially harmful VOC's
• Secure top plate with tightening knob holds cans firmly in place
• Unit mounts on either a 30- or 55-gallon drum with standard 2” and ¾” bung opening – released liquids are captured in drum
• Improperly seated cans will not be punctured; prohibits incorrect use
• System works with domed mini, standard and jumbo aerosol cans
• Attach included ground wire to prevent static buildup