Acrylic Primer Filler SprayMax aerosol

Acrylic Primer Filler SprayMax aerosol

Acrylic Primer Filler SprayMax aerosol is a professional primer filled in a high-quality SprayMax can. This SprayMax Primer FIller spray gives a particularly beautiful spray image with a high paint yield in less time, fast drying and is excellent for both wet and dry sanding. SprayMax 1K AC Filler is the best primer for small damage repairs, sanded through spots and spot repair work on steel, galvanized steel, aluminum and various plastics.

SprayMax Primer Filler with a smooth result

SprayMax Primer Filler spray is characterized by its smooth and tight drying. Unlike other spray primers, this filler dries considerably tighter and smoother than others. As a result, you will need less sanding, only light sanding.

SprayMax 1K Acrylic Filler is available in 3 colors

This high quality 1-component Acrylic filler primer spray can from SprayMax is available in 3 different colors. Depending on the car paint color to be sprayed, choose the appropriate color primer for your spray job. Which colors are available, you can see here.

• Light gray (Value-Shade 2)
• Medium Gray (Value-Shade 4)
• Dark gray (Value-Shade 6)

Features of SprayMax Primer Filler aerosol

• Good insulation of scuffed areas and under water based paints
• Recoatable with all professional primers and topcoats such as 2K color paints and both 1K solvent-based and water-based paints
• Excellent filling capacity
• Good spraying properties
• Easy to use and good sandability
• Fast drying and suitable for IR drying
• Can also be used as wet-on-wet filler
• Consumption: approximately 0.5m ² - 1m ² per spray can depending on the layer thickness and surface

Should I pre-treat this acrylic primer?

We recommend that you de-rust and thoroughly clean the damaged area with the SprayMax silicone remover spray can, so that the parts to be treated are free of grease and dust. Then shake the spray can well for 2 minutes. Then spray a test piece before using the product.

How do I spray SprayMax 1K Acrylic Filler?

SprayMax acrylic filler should be applied crosswise 2 to 3 times. This will give you the professional result of a real paint sprayer! Because the nozzle can be rotated 90°, this 1K Acrylfiller can be sprayed both horizontally and vertically!

• Spraying distance: 10-15cm
• Number of cross coats: 2 to 3
• Evaporation time between layers: 5-10 minutes

What are the drying times of this acrylic filler spray?

The drying of the SprayMax 1K Acrylic Filler depends on several factors. Think of layer thickness, humidity, ambient temperature, object temperature etc. However, we would like to give you some guidelines.

• Dust-dry: 6 minutes at 20°C
• Can be handled: 40 minutes at 20°C
• Sandable: 60 minutes at 20°C
• Short wave Infrared drying is possible: 3 minutes

Notes:

• Wear personal protective equipment (respiratory protection Type: A2/P2, safety gloves such as e.g. latex or nitrile)
• After spraying, we recommend that you turn the spray can upside down and empty the built-in suction tube.