3M Trizact 6000 Fine Finishing Foam Discs P6000 - per 15 pieces

(3)

3M Trizact 6000 Schuurschijf P6000 - per stuk
  1. Complete Your Purchase
  2. Product information
  3. Specifications
  4. Product reviews
  5. Comparable products
Product information

3M Trizact 6000 Fine Finishing Foam Discs Grit P6000

3M Trizact 6000 sanding disc has a foam layer and microreplication technology, the sanding minerals are evenly distributed over the surface. This creates a sanding result with a smooth matt finish.

Wet sanding paint before polishing

Trizact foam disc can be used for sanding car paint before you start polishing. Thanks to the extremely fine abrasive P6000, you are able to sand thin layers of the clear coat. Afterwards, the paint can be polished for an extremely smooth and tight end result.

Sanding blending zones

3M Trizact 6000 can also be used as a sanding disc when sanding blending zones. Thanks to the extremely fine abrasive grain, you superficially sand the blending area. Ideal for spot repairs!

Can be used both mechanically and manually

It can be used both mechanically and manually. The sanding discs contain velcro, which means that they fit onto all sanders (don't forget to disable the dust extraction!). In addition, these can also be used by hand, to manually sand surfaces with an ultimate control over the sanding result. In addition, you can use a 150mm hand sanding pad. Always use water or a good degreaser!

Features 3M Trizact 6000

  • Microreplication technology
  • Even distribution of abrasive minerals
  • Reduces scratches with waterproof sandpaper grit 3000
  • Suitable for matting paint
  • Reduces polishing time
  • Great finish
  • Ideal for sanding blending zones
  • Available in 75mm (3M-51131) and 150mm (3M-51130)
Full product information

Specifications

SKU conf_3m-trizact-6000
Type sandpaper Sanding discs
Implementation Velcro
Number of holes 0
Measurement 75mm & 150mm
All specifications

Product reviews

5/5

Based on 3 reviews

Write your review
Ideal after clear coat from spray can
Spraying clearcoat with a spray can almost never goes perfectly. Sand small mistakes with P2000 and then with the trizact p6000, polish and a perfect result!
Pierre |
Translated from Dutch
Correct and fast good
Top
J. S. |
Translated from Dutch
Fine sanding disc: likes it very much!
It is a somewhat thicker disc (a few millimeters thick) and it polishes very finely.
Marco |
Translated from Dutch
Comparable products