Almost done!
Close
3M Fast Cure 2K Epoxy Metal Filler 180ml
Shipped today
- This product is available from stock
Order before 10pm (Mon-Fri) and your order will be shipped the same day. Order during the weekend? Then it will be shipped on Sunday.
Shipped within 1-2 days
- This product is custom-made
Order before 10pm (Mon-Fri) and your order will be shipped within 1-2 days.
Shipped within 2-3 days
- This product is custom-made
Order before 10pm (Mon-Fri) and your order will be shipped within 2-3 days.
In stock soon
- This product is not immediately available
The product ordered from our supplier and we expect it to arrive any moment. The delivery time/date shown is an indication. Please contact our customer service for the exact delivery time.
Choose your amount
-
1x
-
6x
Save 2% -
12x
Save 5%
Recommended price
Recommended price
-
-
Free delivery with UPS
With us, you choose between collection at a UPS pick-up point or delivery to your address by UPS. So you can enjoy free delivery with UPS, where every order is insured.
Collection from a UPS pick-up point
Choose convenience, ease, and environmental friendliness by picking up your order at a nearby UPS pick-up point. You decide when to pick up your order there. Orders over €200 are delivered for free; for orders below that, you only pay €14.95.
Your benefits:
- Good for the environment and your wallet
- Guaranteed delivery
- Flexible pickup whenever you want
Shipped to Your Address
- Free delivery from €200 by UPS
- For orders below €200, the delivery cost is €15.95
Delivery Times
- Ordered on Monday before 10:00 PM, shipped today
- Ordered on Tuesday before 10:00 PM, shipped today
- Ordered on Wednesday before 10:00 PM, shipped today
- Ordered on Thursday before 10:00 PM, shipped today
- Ordered on Friday before 10:00 PM, shipped today
- Ordered on Saturday, shipped on Sunday
- Ordered on Sunday before 6:00 PM, shipped today
Your order will be delivered within an average of 1 to 2 days.
International shipping Costs
- Netherlands - €5.95 (free above 50,-)
- Belgium - €7.95 (free above 50,-)
- Germany - €7.95 (free above 50,-)
- France - from €9.95 (free above 150,-)
- Italy - from €10.95 (free above 150,-)
- Spain - from €11.95 (free above 150,-)
- Poland - from €12.95 (free above 150,-)
Is your country not listed? Check the complete overview of our international rates.
-
100 days return and exchange
Not satisfied with your product? That’s a pity, but we are going to do something about this. Products can be returned in their original condition within 100 days of receiving your order.
How to return?
- After registering your return, you will receive an email confirmation.
- Please pack your product(s) carefully.
- Print your order confirmation and attach it to the parcel. In case you don’t have a printer, write a note with all your details.
- Bring your parcel to a post office in your area and send it to our address.
Note: after the 100 days return period it is no longer possible to return a product. You still have at least 2-year warranty on your product.
What can you expect?
Immediately after we receive your parcel, it will be inspected by our returns department with a desired solution.
Money back
Within 7 days after confirmation of your product, we will refund the purchase price to the same bank account number used during payment. Did you pay with a gift voucher? You will receive the amount back as a voucher.
Returns of custom made car paint
Have you ordered paint and not satisfied with the color? Our experienced color makers carefully mix the paint with the utmost care. Unfortunately, it is not possible to return customized paint.
Return conditions
- Return within 100 days
- Product must be new
- Product must be in original condition
- Product must be unused
- Product is not custom-made
- Customer reviews: 4.49/5 (15.598 reviews)
- Complete Your Purchase
- Product information
- Specifications
- Product reviews
- Comparable products
3M 37455 FC Epoxy Metal Filler
3M Fast Cure Epoxy Metal Filler is a fast drying 2K filler in cartridge that can be used on all metal surfaces, including steel, iron, metal and aluminum. The filler has been specially developed for filling deep dents and shaping structures in body parts, car parts or other metal surfaces. In addition, it ensures that weld seams are immediately protected against rust and corrosion.
Repair dents in steel
3M 37455 is intended to be used as an automotive body repair material. This fast curing epoxy filler is capable of repairing imperfections such as dents in steel, galvanized steel and aluminum, for the final shaping on difficult-to-reach/rebuild areas or welded joints. It is designed to substitute traditional tin soldering and it is free of isocyanate, silicones and lead.
Mixing ratio
FC Epoxy Metal Filler two-component Universal Cartridge uses a 2:1 mixing ratio (base to hardener).
Easy to apply & fast drying time
3M 37455 Fast Cure is a professional 2K Epoxy Metal filler that is easy to apply and known for its quick drying time. In just 15 minutes you are able to process the filler and is fully cured in 2 hours at 22°C. If desired, the epoxy filler can also be dried with an infra red lamp.
How to use 3M Fast Cure 2K Epoxy Metal Filler?
- Surfaces should be thoroughly de-greased and free from dirt and dust. Sand the damaged area with a P80-P120 abrasive disc. To remove any corrosion or broken paint, a suitable Fibre Disc or Bristle Disc should be used.
- Wipe dust away and clean the surface.
- Before attaching the mixer to the cartridge, squeeze out a small amount of material until both components run equally.
- Material may be dispensed directly onto the damaged area, or a spreader or a mixing board.
- You may continue to dispense material until the normal material curing process clogs the mixing nozzle – typically after approximately 15 to 20 minutes. If more repair material is desired after curing has occurred, remove and install a new nozzle.
- Drying properties: 2 to 4 hours at 22°C and 10 to 20 minutes at 70°C (IR Curing).
- Surface grinding.
Features 3M 37455 Fast Cure Epoxy Metal Filler
- Lead-free
- Ideal for shaping hard to reach places
- Excellent protection against rust and corrosion
- Does not shrink
- 100% solids
- Excellent for sanding
- Fast drying
Specifications
| SKU | 3M-37455 |
|---|---|
| Filler type | 2K (2-component) |
| Brand | 3M |
| Contents | 180ml |
| Packaging | per piece |
Product reviews
3M 37455 FC Epoxy Metal Filler
3M Fast Cure Epoxy Metal Filler is a fast drying 2K filler in cartridge that can be used on all metal surfaces, including steel, iron, metal and aluminum. The filler has been specially developed for filling deep dents and shaping structures in body parts, car parts or other metal surfaces. In addition, it ensures that weld seams are immediately protected against rust and corrosion.
Repair dents in steel
3M 37455 is intended to be used as an automotive body repair material. This fast curing epoxy filler is capable of repairing imperfections such as dents in steel, galvanized steel and aluminum, for the final shaping on difficult-to-reach/rebuild areas or welded joints. It is designed to substitute traditional tin soldering and it is free of isocyanate, silicones and lead.
Mixing ratio
FC Epoxy Metal Filler two-component Universal Cartridge uses a 2:1 mixing ratio (base to hardener).
Easy to apply & fast drying time
3M 37455 Fast Cure is a professional 2K Epoxy Metal filler that is easy to apply and known for its quick drying time. In just 15 minutes you are able to process the filler and is fully cured in 2 hours at 22°C. If desired, the epoxy filler can also be dried with an infra red lamp.
How to use 3M Fast Cure 2K Epoxy Metal Filler?
- Surfaces should be thoroughly de-greased and free from dirt and dust. Sand the damaged area with a P80-P120 abrasive disc. To remove any corrosion or broken paint, a suitable Fibre Disc or Bristle Disc should be used.
- Wipe dust away and clean the surface.
- Before attaching the mixer to the cartridge, squeeze out a small amount of material until both components run equally.
- Material may be dispensed directly onto the damaged area, or a spreader or a mixing board.
- You may continue to dispense material until the normal material curing process clogs the mixing nozzle – typically after approximately 15 to 20 minutes. If more repair material is desired after curing has occurred, remove and install a new nozzle.
- Drying properties: 2 to 4 hours at 22°C and 10 to 20 minutes at 70°C (IR Curing).
- Surface grinding.
Features 3M 37455 Fast Cure Epoxy Metal Filler
- Lead-free
- Ideal for shaping hard to reach places
- Excellent protection against rust and corrosion
- Does not shrink
- 100% solids
- Excellent for sanding
- Fast drying
