2K Acrylic Filler SprayMax aerosol

2K Acrylic Filler SprayMax aerosol

2K Acrylic Filler SprayMax aerosol is a professional high build primer with excellent high filling properties. This SprayMax acrylic 2K primer has an excellent flow and very good insulating effect on old paint layers.

SprayMax High Build 2K primer

SprayMax High Build 2K primer is characterized by its extremely fast drying. Thanks to the short drying time you save time and therefore money. As a result, this primer is quickly re-sprayable with all 1K and 2K car paints. This SprayMax 2K filler aerosol can be oversprayed with both water-based and conventional paints.

What are the advantages of this 2K Filler spray can?

SprayMax 2K Acrylic filler brings many advantages. What these are we would like to list for you.

• Very good flow and insulating effect
• Simple in use
• Easy to sand
  Very fast drying, also suitable for IR drying
• Can be used as wet-on-wet filler
• Overpaintable with all one-pack and two-pack finishing systems
• Also suitable for waterborne basecoats.

What can I use this SprayMax 2K primer on?

This 2K Acrylic Filler in spray can can be used on steel, aluminum, galvanized plates, putty, and old paint layers.

• Old paint layers (cleaned and sanded)
• Fully cured repair work paint (cleaned and sanded)
• Electrophoretic paint (cleaned and sanded)
• Small areas sanded through (cleaned and sanded)
• Large scuffed areas pre-sprayed with SprayMax 1K Filler Primer or SprayMax 2K Epoxy Primer Filler

How does a SprayMax 2K spray can work?

• Shake the can well for 2 min. before activation
• Remove the red push button from the cap
• Turn the spray can 180° and put the push button on the pin in the bottom of the spray can
• Turn the aerosol can with the cap upside down for a stable base
• Press the red button with the ball of your hand
• After activating, shake again for 2 minutes

Application

• Wet-on-wet. 2 layers = 40 μm
• Sanding filler: 3-4 layers = 60-80 μm
• Consumption: approx. 0.3 m² - 0.6 m² / per spray can depending on application thickness and object

Drying times of the 2K acrylic filler

• Dust-dry: 5 min at 20°C
• Touch dry: 15 min at 20°C
• Sandable: 5 hours at 20°C
• Approximately 24 hours at 20°C room temperature
• Application depends on the ambient temperature. Higher temperatures lead to shorter and lower temperatures to longer shelf life

Sandable

• After 5 hours at 20°C wet with grain Waterproof P800-1200
• Wet-on-wet recoatable
• Can be oversprayed with all common one-pack or two-pack finishes (both solvent-based and water-based lacquers)